Since I’m assuming you will want to live stream often to check on your kids, I would recommend a wired security camera. The original Canary is a good option as is Arlo Q. Both will allow you to live stream from anywhere. Original Canary does not offer two-way audio for free, Arlo Q does, something to consider if you want to be able to talk to your childcare provider or children using the camera. Both cameras include free cloud storage.
Before we get ahead of ourselves, how did Ring become a giant in home security now worth over $1 Billion? They started out as 'Doorbot' and failed getting an investor on Shark Tank. While this could have been a low blow to the company, they pursued the smart doorbell camera and became the leader of it (Vivint to follow in 2nd). Richard Branson chimed in with a large investment and that really got the company going. Fast forward some years and now they are in thousands of stores and in neighborhoods across the nation.
Nest, Ring, and abode all sell cameras. Nest works with Nest Cams including the indoor and outdoor cameras, Nest IQ both indoor and outdoor, as well as Nest Hello. When Nest Secure detects an alarm event, it will trigger your Nest cameras to take a snapshot. If you have email alerts turned on, the cameras will email you a snapshot of the event. It can also send a push notification to your phone.
That said, using abode with a Nest Cam is my recommended solution, and integrating the two provides one major advantage: more free storage for your Nest Cams. The major disadvantage is that even if you are a Nest Aware subscriber, abode can only store snapshots. If you want video clips or continuous cloud access, you will need to pay for Nest Aware to access your footage via the Nest app.
I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.
EverCam is a newer option made by a Chinese company who has never made a security camera before. That said, despite their Kickstarter success, I’m hesitant to recommend the camera even though it boasts an impressive feature list. For one, they refused to answer my in-depth questions about the camera which makes me a little suspicious. Two, they are promising many AI-rich features without a monthly fee. As a consumer, I know that’s tempting, but I also know it’s unsustainable. Facial recognition, for example, does not live on the camera itself. The feature is cloud-based which is expensive to maintain; hence why you see companies like Nest charge a fee to access features that are heavy on AI.
Third, Nest Guard has a voice. Of course, it’s no Google Home, but it will provide useful information. For example, when you arm your system, there is an arm delay which allows you to exit your home without setting off the alarm. Instead of an annoying beep that continues until the system arms, Nest Guard uses a friendly voice to tell you how much time you have left.
Though the Ring Alarm system covers the bases for a home security setup, there’s a lot of room for integration with other smart home products that Ring has left on the table. For example, it’s not possible to use the Ring’s motion or contact sensors to trigger lights or adjust a smart thermostat when you leave or come back home. This is despite the fact that the Ring Alarm sensors are based on Z-Wave technology, which is a widely used smart home standard.
Thanks to advances in sensors and other smart home technology, the landscape of home security systems is changing dramatically. It’s now possible to install a professionally monitored system in your home yourself in just a matter of minutes. You can even bring the system along with you when you move to another house or apartment. And the cost for these new systems is far less than traditional home security plans.
As is the case with the Nest Secure system, the Ring Alarm does not support IFTTT applets or react to Amazon Alexa or Google Assistant voice commands. A Ring spokesperson has confirmed that support for voice commands and many other third-party devices is in the pipeline, and will include support for the soon-to-be-released new Ring Stick Up Cam, as well interoperability with other Ring devices.
To test all the professionally monitored security systems out there would too expensive due to the high monthly fees so I usually keep up with them at CES when I can, and Vivint attends CES. I’ve seen all of their cameras including the doorbell in Vegas, but it’s not the same as living with something for months and experiencing the quirks that often come along with longterm ownership. You can read my Vivint review here, but I doubt it’s going to help with the issue you are experiencing. Vivint processes motion events in the cloud. I believe they recommend that customers have a minimum upload speed of 2MBPS.
For the backyard camera I also installed the solar panel which is packaged separately with its own mounting kit. Once it’s mounted, you plug the connector wire into the back of the Spotlight Cam and secure it with two screws. It fits flush to keep water out of the port. Ring recommends one to two hours of direct sunlight per day to keep your battery charged, and you can angle the solar panel’s mounting arm to ensure it soaks up as much sun as possible. The days I tested the Spotlight Cam Solar were mostly overcast, but I still saw a 3-4 percent charge increase each day, and I’d expect much more on sunny days.
Ring’s smart home security system does not include carbon monoxide monitoring. If you want to add this feature to your home, you can purchase either Ring’s Alarm Smoke and CO listener or First Alert’s Z-Wave Smoke/CO alarm. These are installed next to your current smoke alarms and will hear when either go off which triggers your security system and lets you know there is an emergency at home.
Nest, Canary, Ring, and Arlo all have advantages and disadvantages. Nest has an advantage in that it can capture footage 24/7. Canary has an advantage in that it offers person detection for free. Arlo Pro and Ring Spotlight have an advantage in that the cameras can run on battery power and they wake up for both motion and live streaming faster than Canary Flex. If I were to rank them, I would rank Nest and Arlo Pro the highest and also add that a video doorbell is a must. You can read my video doorbell compare here.
I’m not certain about Nest, but I asked abode about this before. They said, “We have what is called abode Signal Guard. Unlike other smash and grab solutions, the Signal Guard works whether your system is self-monitored or professionally monitored. The abode Signal Guard alarm acts just like a normal alarm where notifications are sent and the siren(s) go off until the alarm is disabled. If you are a professionally monitored customer, the monitoring center is notified of the abode Signal Guard event.”
My indoor Canary is self-sufficient, and that is exactly what I want in a home security camera. Flex has yet to provide that same experience. I’ve had to physically interact with the device multiple times to get it to reconnect to my internet. Also, the geofencing feature is inaccurate, often marking me away while home and vice versa. As for power loss notifications? They’re hit or miss.
If you're set to Home and Armed and you trigger an entry sensor that's fitted anywhere but your front door, the base station will sound a piercingly loud 104-decibel alarm until you can get to the keypad, or to your phone to deactivate it. If you're Away, both the motion and the entry sensors will trigger the alarm — unless, again, the entry sensor is affixed to the front door, in which case it will start a 60-second countdown until you enter your PIN (you can adjust the timer as you need).
The latest addition to Ring's home security platform, the Ring Alarm Security Kit ($199), contains everything you need to protect and keep tabs on your home. As with other DIY smart home security systems, installation is quick and easy, and you can either self-monitor or pay a modest fee for a professional monitoring service. The system worked well in our tests, but we were surprised to find that it offers limited support for third-party devices, and although it uses the same app, it doesn't interact with other Ring cameras or doorbells, at least not yet. For the time being, we continue to recommend SimpliSafe as our Editors' Choice.
The Ring Alarm system comes in an attractively packaged box that includes a square base station, a keypad, contact sensor, motion detector, and range extender. Unlike the Nest Secure home monitoring system, Ring created the hub and keypad as separate devices to give homeowners more control over where to place them. The products are both lightweight and durable, although the keypad digits do feel a bit antiquated when you press them.
Ring's $199 Z-Wave-enabled Alarm Security Kit is so simple you might overlook it at first. The system includes a base station, a keypad, a door/window sensor, a motion sensor and a Z-Wave range extender. It's all basic hardware with basic functionality -- you won't find any fancy features here -- but the Security Kit is super simple to set up and monitor in the Ring mobile app.