The device shipped ready to be mounted on an eave, but I decided that I wanted to mount it on a wall. To do that, you have to swap the mounting plate from an upward facing to a downward facing position. What I learned while doing so is that Ring fails to mention that the device does not ship with the security screw already in place so even if the mounting plate is already in the position you want, make sure to check on the security screw. Instructions on removing the mounting plate are found on page 15 of the included instruction manual.
Aside from the obvious value proposition, Ring’s big pitch for the Alarm system is its simplicity. Though it has all of the features necessary for a proper home security system – professional monitoring, battery and cellular backup for the event of a power loss – installing the Ring Alarm in my home took less than 20 minutes and involved following the app’s instructions to get the base station on my Wi-Fi network and register each included piece. Cleverly, Ring presets the included motion detector, contact sensor, and range extender to pair with the hub that’s in the box, so getting them set up is just a matter of pulling the battery tab to wake them up and waiting a moment for the app to find them.
Ring Chime Pro: For $49, you get a Wi-Fi extender and an indoor chime that lets you know when you have Ring notifications. This accessory is particularly useful if you have a lot of Ring devices in a larger home, as it helps you eliminate Wi-Fi dead spots that could prevent important notifications. You can change the alert tone, adjust the volume and put it on a Do Not Disturb mode. If you just want the chime capability without a Wi-Fi extender, the Ring Chime is $29.
All three systems require that you purchase the hardware upfront, and they all offer some services for free including free app access as well as third-party integrations (though many of Nest’s and Ring’s integrations have yet to launch). However, they all offer paid plans too. Nest and abode have three options: self-monitoring, self-monitoring with cellular backup, and police dispatch with cellular backup. Ring has two options: self-monitoring and police dispatch with cellular backup.
I’ve enjoyed reading your summaries for over a year. I initially had my mind set on Abode after removing iSmartAlarm and SimpliSafe (previous generation) from consideration. I had an Abode package all set and nearly pulled the trigger on a purchase. However, after coming across Ring and reading your review multiple times, I ultimately went with Ring. What won me over was the package being offered by Costco that has six door/window sensors. When I priced out what Abode would cost to have comparable coverage, Ring clearly won out. I don’t need any integrations or automation, thus I don’t feel I’m losing out on those aspects by selecting Ring over Abode.
All these new DIY systems pretty much rely on cellular and/or Wi-Fi. It seems that although it makes things more accessible, cheaper and easier to install, that’s where most of the glitches, or inconsistent alarm notifications come from, right? But in general it’s good that these systems have been made available for us all to choose from. Thank you for helping us navigate all the choices.
I recently purchased the new Ring security system after owning the video doorbell for a while. I bought this system to allow me to ditch my system and service from a large national provider (42$ per month for monitoring vs 10$)! Firstly, I have been interested in this product and company since I saw Jaime Siminoff on Shark Tank back in 2013. Back then the company was called DoorBot. I like the new name much better.
Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.
While other smart security systems let you arm the alarm through key fobs, unfortunately, the Ring Alarm system does not have this capability at this time. Using a fob makes things quicker and easier than opening an app or punching in a code; however, Ring does have plans to make its system compatible with Alexa in the future, so that will make things a little easier.
If you do have smart lights and want to control them with a contact sensor or motion detector, you will need to install separate ones in addition to Ring’s, which can make your front door look like it’s grown barnacles with all of the sensors installed. Another simple integration would be to set a smart thermostat to its away mode when the Alarm is set to away, and then switch it back to its home mode when the Alarm is disarmed, but that’s currently not possible either.
Hey Scott, sorry about your car. Under shortcuts, you will find the video reviews. For Nest, night vision is shared at minute 1:43 and keep playing for just a moment to see night vision from Ring. During the Arlo vs. Canary video (the third video shown), skip to minute :54 to see night vision from Canary and keep playing to see a side by side comparing it to Arlo. To me, they are all about the same. I’ve found that the best night vision comes when you leave the lights on. I actually have automated lights on my porch, and they turn on at sunset and back off at sunrise. Integrating the cameras with a smart home system: I’ve tested Arlo Pro with SmartThings, I wasn’t a fan of that. It actually changes the mode to a new mode called SmartThings. I prefer geofencing mode. Ring I’ve tested using IFTTT, but I haven’t tested it with SmartThings.
I’m trying to set my mom up with a constant live feed of their front door. I bought a cloud cam and echo show, before realizing their house isn’t set up to get much of a front door view from the inside. Think a hard wired ring pro with echo show always displaying the live feed would work, or drain the rings battery even though it’s hard wired? Any other ideas? I’d like to keep the echo show, but will probably return the cloud cam.
“Where we’re going with it is once we know this, we can then do things in our network which include, you know if someone’s walking around your house at 3 AM in the morning and your house is on stay mode, then we can do a different type of alert or sort of raise the alert level on that camera,” explained Siminoff. “And then we do things like deliver presence saying ‘How can I help you, what are you doing?’ and so really taking that presence and that interactivity, and that pre-crime thing that Ring is so good at and take it to the next level by knowing the status.”
4) Motion detector- again people say they are large ; but they are SMALLER than hard wired motion detectors I have - the differenc is the hard wired ones are embeddded itnot the drywall (but you can do this with the smaller ring detectors Too if you want. You can buy a plate to finish off the drywall edge of the small “cubby:” you create OR just buy some trim at Home Depot that matches your current baseboard or ceiling/door trim , buy a plastic miter box for $10 and make 45 degree cuts and you have your custom tight frame ready to paint (ANYONE can do this !) and you can locate the motion detectors anywhere you have a drywall wall ! Compared to any wireless motion detector than nest they arent that large -nest ones are 50% more $ and they are nots o small as to go un noticed anyway !
The original Ring has a battery option. I don’t know how I would feel about that because you do have to remove the doorbell to charge it. Ring claims it will last 6-12 months on a charge. If that’s true, that wouldn’t be so bad; however, I would expect it to last like 3-6 months. In my experience, when a company gives a top end battery life range, that’s how long it will last if you never use the device. All that said, I don’t know how hard it would be to move a wired doorbell to the front of your door.
The Alarm system performed flawlessly. The base station chimed whenever a sensor was triggered while in Disarmed mode, and the event was added to my history log within seconds of the event. I promptly received push and email notifications whenever there was a mode change or when the base station was unplugged and switched to the cellular network while running on battery power. However, the Alarm system does not send push or email notifications when a sensor is triggered while in disarmed mode like the Vivint Smart Home system does. This may not seem like a big deal, but it's nice to know when windows and doors are being opened if you're away while other family members are home with the system disarmed.
The door/window sensors (also called contact sensors) work pretty well, but the same cannot be said about the motion sensors; they will detect motion after there’s been plenty of movement (if I walk the hallway and enter a room it will not detect, but if I sit for a few seconds moving in the hallway it will detect it then). This is still not a show stopper for me, as I have a dog and don’t plan on buying any more motion sensors, it will be all contact sensors.
I’m in the rocky mountain region where it occasionally gets well below -4 and can verify your reader’s quote about cold weather limitations w Nest outdoor. I asked Nest support about this and they suggested that a different product might make sense. Seems like there really isn’t a good DIY option for users that live in cold weather? Arlo pro battery life is impacted, Flex only rated down to 14F and Nest said I should try a different product in cold weather.
The Nest Guard motion sensor can detect motion within a 90° field of view up to 10 feet away. It also includes tamper detection as well as a proximity sensor (wakes on approach) and will let you know if it’s moved or if someone tries to jam your signal. However, in testing, I found that none of the promised tamper sensors worked. I did not test jamming detection.
Finally, I wouldn’t put too much weight into the Amazon review from 2015. Things have really changed since then, including the Nest app. The Nest app was a little slow going when first launched, but they’ve really improved it and added back features that were initially missing, though found within the Dropcam app, plus added new features like person detection.
As of this writing, there are only a handful of add-on devices available that will work with the system, and for now, it doesn't support integrations with other Ring devices or third-party Z-Wave and Zigbee devices. That said, integration with Ring doorbells and cameras is on the way, and interoperability with third-party devices is also in the works.
I'll be the first to admit, the thought of installing the alarm system on my own was a bit scary, and I didn't know that I would be able to get it done. I'm not exactly the handiest person, and my wife doesn't like things to be messy in our brand new house. Ring does an incredible job at making the unboxing experience extremely easy by labeling everything so you exactly what goes with what. In just under 90 minutes I was able to get everything out of the box and set up, including mounting the hardware.
The Spotlight Cam works with IFTTT , applets so you can have it work with other IFTTT-enabled smart home devices such as sirens, smart switches, and lights. It also works with Kwikset Kevo and Lockitron locks, the Wink Hub, and Wemo devices, and you can use Amazon Alexa voice commands to view video on an Echo Show display or other compatible device.
Nest will intelligently alert you, within reason. For example, you can have the street set as a zone, but turn off notifications for the street. Nest can also tell you when it sees a person or thinks it sees a person. In fact, you can choose to only receive alerts when it sees a person, which virtually eliminates false alarms. Better still, you can turn on person detection for the entire frame or from select activity zones.
The Ring Alarm system comes with a base station, a keypad, an entry sensor, a motion sensor, and a Z-Wave range extender. Also included in the box are installation kits containing mounting tape and hardware for the keypad and the two sensors, an AC adapter for the base station, a USB power adapter and cable for the keypad, a getting started guide, and an alarm kit security basics guide.
Would it be better than 1080p? Yes. Would it be good enough? I don’t know. I only tested the indoor IQ, not the outdoor. I didn’t think Supersight was that fabulous. Here’s a link to a section of my video that shows the Supersight in action (https://youtu.be/BIWchrX27fU?t=2m28s and also here https://youtu.be/BIWchrX27fU?t=56s). On the white table that’s on the right side of the frame, there are a few books stacked up. You can’t even read the titles on the bindings, but maybe a license plate would be different?
Along the bottom of the screen are buttons for Event History, Device Health, Linked Chimes, Motion Settings, Motion Snooze, App Alert Tones, and Shared Users. The Event History screen offers a list of recorded activity. Tap any event to play a clip and share it with friends and family or with your neighbors by pressing the Ring Neighborhoods button. Ring Neighborhoods is a feature that lets you share recorded events with neighbors who have downloaded the app and signed up to participate. It is based on the location data entered during setup and allows you to add a comment along with your clip.
Ring Neighborhoods is a service that lets you share videos with other nearby Ring users or anyone who has downloaded the Ring app. The service ties into another feature called Ring Locations. Ring Locations allows you to attribute your different Ring devices to different locations and customize user access for the same. For example, you might have your Ring Doorbell at one location where your kids have Homeowner user status, while you have Ring Alarm at another location and limit their access to Neighbor.
Most of my setup time was spent testing the position of the three contact sensors I received. The magnetic sensors consist of two parts. One part goes on a door or window frame, the other part goes opposite it so that when the door or window is opened, the magnetic connection is broken. If the two pieces aren't close enough, roughly half an inch, the sensor doesn't work.
Being a cautious optimist, I first followed the app instructions; this was a mistake. Unfortunately, the app instructions are incomplete and leave out important details. Next, I moved on to the included instruction manual where I learned that the first step of the installation process is to fully charge Spotlight’s battery. Unfortunately for me, it was too late for that. The app also skipped another essential step found in the instruction manual: mounting position.
Ring Alarm hits nearly all the right notes for a basic DIY home security system. I’ve already touched on a couple of its shortcomings—including an absence of support for smart speakers—but tighter integration with Ring’s own cameras would be another welcome development. When an alarm is tripped, the cameras should begin recording to perhaps capture a glimpse of what triggered it—potentially valuable forensic evidence you could provide to the police investigating a break-in. And if Ring Alarm could control your home’s smart lighting, it could turn on all the lights if the alarm is triggered after dark, which might convince an intruder to make a hasty retreat.
Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere. Ring Alarm is fully customizable and expands to fit any home or apartment. And with Ring Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app.