Oco Pro Bullet is weatherproof, has an SD card, cloud storage, night vision, smart motion detection, and records in FHD 1080p. It can also work in a wide range of temperatures, from -22 °F – 140 °F (-30 °C – 60 °C). But it has one massive limitation: viewing angle. Unfortunately, it only offers an 85-degree viewing angle. Also, the indoor version fell flat on many of its promised features. While the outdoor camera uses different hardware, the indoor experience left me feeling leery towards Oco’s ability to build a quality camera.
While setting the system up, my motion sensor got hung up and wouldn't stop detecting motion. I had to reset it, which I did through the app, but since it was part of the kit, the process was a little different than the app stated. This was a minor annoyance, but worth noting that if you ever run into an issue with any of the pieces that come with the kit, you'll need to do a full reset of that piece so that the base station can see it again.
What sets Nest Guard apart from the abode and Ring’s base station is its intuitive nature. First of all, the integrated keypad is a smart choice because let’s face it; phones get lost. In addition to a keypad which accepts a numeric passcode, Guard has several buttons. You can press a button to quickly swap between modes (alarm off, home and guarding, and away and guarding) or you can press for immediate help using the panic button which is found on the back of the device.
For the backyard camera I also installed the solar panel which is packaged separately with its own mounting kit. Once it’s mounted, you plug the connector wire into the back of the Spotlight Cam and secure it with two screws. It fits flush to keep water out of the port. Ring recommends one to two hours of direct sunlight per day to keep your battery charged, and you can angle the solar panel’s mounting arm to ensure it soaks up as much sun as possible. The days I tested the Spotlight Cam Solar were mostly overcast, but I still saw a 3-4 percent charge increase each day, and I’d expect much more on sunny days.
After the battery is charged, you can move the camera to a new location, so long as it’s within your WiFi’s range. The camera will work using battery power alone, or you can continue to use it plugged into a power outlet. Since the launch of Canary Flex, Canary has also promised a 4G LTE mount, but they haven’t, and probably won’t deliver. If cellular connectivity is something you’re interested in, I suggest you look into Reolink Go or Arlo Go.
Enjoy superior image quality courtesy of the 4MP Enjoy superior image quality courtesy of the 4MP sensor delivering twice the resolution of 1080p for stunning clarity. Wide Dynamic Range enriches your image quality with deep blacks contrasted whites and vivid colors so images appear true to life. Infrared LED's give you up to 100 ft. of night vision ... More + Product Details Close
I’ve had 2 Arlo Pro cams for a few months now. They both work very well, although the false motion trips by wind or in my case a train that comes by is a bit annoying. But what I have found is that I really want a camera that is on 24/7, that I can go back and scan thru in case there’s an issue. The other thing is the delay. I had a person enter my property and the Arlo caught him just as he was almost out of the camera. A friend of mine told me to check out a FLIR camera. I don’t have a good home security system, so I would like to have something that can expand as far as needed. I can always take my Arlo to my office and use it there if I decide to switch.
The other thing of note is its lack of smart home partners. Despite being owned by Amazon, Ring's system doesn't work with Alexa or any other major smart home platforms. If you want to arm and otherwise get the status of your home security system via voice commands, the Ring Alarm Security Kit isn't the right option for you. Ring does specify in its support section that it's working on these integrations for a future release.
Where Nest Wins: Nest has a better design, fantastic cameras, and cheaper cellular backup. Their multi-purpose sensors may cut down on the number of sensors you need, though they are more expensive than abode and Ring sensors. Also, Nest Guard is the most intuitive with LED lights, a keypad, and voice feedback. Finally, Nest Secure offers a 2-year warranty where abode and Ring offer 1-year warranties. However, there are areas where abode and Ring win too.
First, people have complained about the larger size of the door sensors and magnets. I didn't really think this was a problem until I tried to install them on my windows. The size of the sensor itself isn't really the issue. Its the size of the magnet. IF YOU HAVE DOUBLE HUNG WINDOWS, LISTEN UP!!! If you aren't sure what a double hung window is, it is a window in which both the top and bottom panes can be opened. You can slide the top pane down or the bottom pane up independently of each other. Why is this a problem? If you do not modify the magnets for the sensors, you will need to buy two sensors for each window that you have. With my last security system, the sensor was mounted to the bottom pane and the magnet was mounted to glass on the top pane. This was done so that if either pane was moved, the sensor would trip. With the Ring window sensors, the magnet is too big to place on the glass so that the bottom panel can be moved. If you try to open the bottom panel, the window will hit the magnet and knock it off, causing it to sit on the panel in front of the sensor and not trip it. Not all windows are made the same, so this may not be the case for you, but it is worth considering. The only way I have found to get around this is to order two sensors per window or to remove the magnet from the casing and attach it to the glass. The second option doesn't look aesthetically pleasing at all. If I figure out another way, I will update this review.
The Z-Wave range extender and the sensors in the kit are pre-paired with the base station, so you just need to enroll them into the app. Ring also sent me a couple of add-on door/window sensors so I could experience the full onboarding process. This simply involves scanning a QR code on the device, verifying that the PIN printed below the QR code matches what’s displayed in the app, and then pulling the battery tab.
You can also disarm the system from the app, but in a break from convention, Ring does not offer a key fob for arming and disarming the system. Geofencing that would automatically arm and disarm when you leave and return isn’t supported either. Harris said those were conscious design decisions. “What it came to was security,” Harris said. People said ‘Hey, I want this to automatically disarm my security system when I get close.’ The question then becomes: How close? And is it really you with your phone? Or did someone pick it up at the park, find your address, drive to your house, and let themselves in?”
The Ring Spotlight Cam Battery is ideal for users who want to monitor what's going on outside but don't want to be bothered with electrical wiring. Installation is a breeze, and with two battery packs installed you can get up to two years of power between charges. The Spotlight's motion sensor shined bright in testing, and the camera's 1080p day and night video was sharp. As with other Ring devices, the Spotlight can be integrated into a Wink or SmartThings home automation environment, and it works with IFTTT and Alexa voice commands as well as several other third-party devices. However, you have to subscribe to a Ring Protect plan to view and share recorded video.
Ring Protect retails for $199 for the basic hardware, which is also less than Nest Secure’s $399 entry price. The system also works with all of Ring’s existing products, and will be rolling out support for third-party connected devices over time, too. On its own, it operates as a self-monitored connected security system, sending you alerts while you’re away. The Protect plans starting at $10 monthly include 24/7 monitoring by professionals, as well as unlimited cloud storage for recording from an unlimited number of Ring devices, as well as a 10 percent discount on future Ring hardware purchases.
Ring does include a practice mode with its professional monitoring, and by default for the first seven days after activating your account authorities will not be contacted if the alarm is triggered. This gives you time to learn how your system works without burdening authorities with false alarms. If you wish to exit practice mode before the seven-day period is up, you can do that, but Ring will warn you in the app about the importance of making sure everything is working properly before you do that.
2. I tried to use it to find footage of an event, and it was incredibly difficult. The Wyze Cam history tab uses a generic photo for all alert events. You can’t even see a photo of the event without clicking in. When I use a camera indoors, the ease of finding video evidence is less of an issue, but when you’re trying to pinpoint something that occurred outside, you usually have a longer time frame to sort through. For example, we had someone spray paint the curbs in our neighborhood overnight which means I had to look through several hours worth of footage. It was annoying, and all of the footage was irrelevant so it was time wasted.
The Alarm system performed flawlessly. The base station chimed whenever a sensor was triggered while in Disarmed mode, and the event was added to my history log within seconds of the event. I promptly received push and email notifications whenever there was a mode change or when the base station was unplugged and switched to the cellular network while running on battery power. However, the Alarm system does not send push or email notifications when a sensor is triggered while in disarmed mode like the Vivint Smart Home system does. This may not seem like a big deal, but it's nice to know when windows and doors are being opened if you're away while other family members are home with the system disarmed.
It was 20*F outside when I installed the cam. I didn't want to be running up and down a ladder if I had problems connecting to the network. I wired the cam up with a plug (from an old, grounded extension cord) and ran the wifi setup routine at my kitchen table. I verified everything was working (including the app, motion detection, etc.) before I installed it outside.