New, unopened Ring Spotlight Cam wired uses motion sensing to detect intruders! Plug it in, and then it picks up movement, the spotlight turns on, and it begins recording in 1080p with infrared night vision and two-way audio. It connects to WiFi, allowing u to monitor surveillance straight from your phone! It also contains an alarm that u can activate if needed. It is weather resistant and the perfect device to keep your home safe!
Ring also sells several cameras including the Ring Video Doorbell, the Video Doorbell 2, Ring Elite, and Video Doorbell Pro. They also sell a Floodlight Cam, Spotlight Cam, and two versions of their Stick Up Cam. Most of the cameras are geared toward outdoor use with the exception of Stick Up Cam Wired and Stick Up Cam Battery. The two cameras can be used indoors or outdoors.
Wow……this is a ton of info. Thank you. I was about to purchase the Blink XT 3 camera system but now I will not based on yours and many reviews. I was stuck on Ring but reading your Arlo review got me thinking….I want wireless, yet compatible for front door area, carport and outdoor bar (all covered with roof). My neighbor has both ring doorbell, and outdoor nest cameras but he says wifi for nest is “iffy”. What is your recommendation for a 3 camera (outdoor/wireless) system for full coverage (not just snippets of video), and reasonably priced service for watching clips if needed. Live feed I assume is available for all; even if cloud service is not purchased? More peace of mind for my family’s safety etc. but love to watch live feed (on phone app) when not home. I have been wanting cameras for 2 years and now with so much available product, it’s getting harder to decide. Thank you for your time.
RING is not a perfect or fully reliable dproduct yet of course. The first alert produced CO/smoke alarm cant hold a candle to nest but its functional and accurate. RING does have small saucer shape microphones that you can co-locate with your current smoke detectors (even NEST as you prefer and I have) but a real simple fix would, esp for thsoe without legacy fire alamsrnm they like, is to simply have first alert make alaRMS FOR RING OR RING sell First alert smoke detetctors with all the ugly lettering and logos removed !

Ring Alarm supports a sensor bypass mode, which allows you to arm the system even if one of the sensors is currently tripped. For example, if you want to arm the alarm but leave a monitored window open, the system will notify you upon arming that one of the sensors is currently faulted. You can choose to close the window to clear the sensor or bypass it, which will arm the system but not monitor that sensor until the next disarm/arm cycle.

In home mode, the default setup is for motion sensors to be ignored while door/window sensors will trigger the alarm to activate. This mode is obviously intended for when you're moving around inside your home but want to be protected if someone enters the house through a monitored door or window. Finally, away mode arms all sensors so that any opened monitored door or window or movement within the house will set off the alarm.
Hi Rose, thanks for the reviews. I am about to send a Vivint system back due to the doorbell camera. It does not capture motion events. I am curious as to why you did not review them (or the camera). They are complaining about my upload speed of my WiFi, which makes me ask, where are the motion detection algorithms processed? Are they run on the doorbell, the panel or only after it is uploaded? Did you look into that?
With the base station up and running, I was able to verify the address associated with my Ring account, enter my closest cross street to assist emergency responders, and add emergency contacts to be notified if the alarm trips. Adding a verbal password to authenticate my account when Ring calls due to an alarm event was the last step, and I was good to go with the 30-day free trial of professional monitoring. After the free trial, professional monitoring costs $10 per month or $100 per year, and it also includes cloud video storage for any other Ring camera and doorbell products you have in your home.
By default, Ring Alarm offers three modes: Unarmed, Home and Armed, and Away and Armed. You can use the keypad to change modes, or use the mobile app, which also offers access to any Ring cameras you might have set up in your home. The app also provides status updates on any connected devices you have in the house, a separate history log for the alarm system and the cameras,  a settings panel for configuring professional monitoring and what each mode does when activated.
Ring is owned by Amazon, so we fully expected to be able to have our security system chatting it up with our Amazon Alexa and other smart home devices. But that’s not the case, at least not yet. We spoke to Mike Harris, Ring’s President of Ring Solutions, and he said that Ring wanted to focus on security first and foremost, as well as getting people comfortable with the system, before introducing integration with other products. But users can expect integration that already exists to be activated soon.
RING is not a perfect or fully reliable dproduct yet of course. The first alert produced CO/smoke alarm cant hold a candle to nest but its functional and accurate. RING does have small saucer shape microphones that you can co-locate with your current smoke detectors (even NEST as you prefer and I have) but a real simple fix would, esp for thsoe without legacy fire alamsrnm they like, is to simply have first alert make alaRMS FOR RING OR RING sell First alert smoke detetctors with all the ugly lettering and logos removed !
If you have signed up for 24/7 professional monitoring, you may need a permit to dispatch emergency services. After signing up for Ring Protect Plus, you’ll get an email from our dedicated Permits Team so you can have everything you need to apply for your permit. In some cases, our team will handle the entire permitting process, but for others, we’ll walk you through every step to help you get your permit as quickly as possible.

The battery version of the camera can only use a battery. You can’t plug it in. According to Ring, the batteries should give you six months of life before needing to be recharged, but that wasn’t my experience. After testing the battery for three weeks, my battery level dropped from 100% to 47%. It was depleted before the two-month mark. If you plan to use a battery, I suggest buying two. As mentioned in the installation guide, Spotlight Cam ships with one battery, but it supports two. This configuration will improve your camera’s uptime. When one battery dies, you can charge it while battery two kicks-in to power your camera. Ring sells additional batteries for $29.


One major issue that I have is that I don't believe there is a duress code for this system. A duress code will disarm the system but also secretly send a notification that there is a problem to the monitoring company, who will send the police. The Ring system has a way of doing this that would make it obvious to an intruder that you're letting the police know there is a problem. The panel has two buttons with red dots on them. By pressing both buttons at the same time, the system will notify the Ring monitoring center that you need assistance. The problem is that the intruder will definitely see you do this instead of entering your code to disarm the panel. I can see where this may upset the intruder. I feel like Ring needs to step up and add a duress code feature so that you can be discreet about needing help.
The second issue I have for the system is that there is no quick exit feature. For the entire six years that I've had a security system, I have been used to being able to press a button that will give me one minute to quietly exit the house. This is important when I am leaving for work a few hours before my family wakes up for their day. The Ring system doesn't have this feature at all. When the system is armed, it has to be disarmed (which it announces) and rearmed before exiting with a delay that can be set up with your phone (it will announce this as well and will make a sound while it counts down) or can be armed from your phone after you leave (again, it will announce this with the countdown sound). You either have to chose if you want the system to count down or not. Not counting down will immediately arm it and you will have to arm from your phone if you leave and arm it on the "Home" setting while others are still there. You can adjust the sound that is emitted from the panel so that it isn't loud, but it will also make your door and window chimes use the same volume all of the time. If you have your system armed while you’re home, and the volume is down, you might not hear the system telling you that it needs to be disarmed if you forget and open a door. There is no in-between here. If you have to leave while others are still sleeping, this may be a problem for you.

The battery version of the camera can only use a battery. You can’t plug it in. According to Ring, the batteries should give you six months of life before needing to be recharged, but that wasn’t my experience. After testing the battery for three weeks, my battery level dropped from 100% to 47%. It was depleted before the two-month mark. If you plan to use a battery, I suggest buying two. As mentioned in the installation guide, Spotlight Cam ships with one battery, but it supports two. This configuration will improve your camera’s uptime. When one battery dies, you can charge it while battery two kicks-in to power your camera. Ring sells additional batteries for $29.


If it's an entry sensor you're installing, Ring will ask what kind of door it is to apply the right sort of security to it — if it's your front door, for instance, it will use an entry countdown when you open the door while the base station is in Home and armed mode.  If it’s the back door that's opened in this mode, the alarm will sound immediately.
After I finished installing this device I found myself having issues with it for the first 3 days where sensors will go offline for no reason almost every day; suddenly after day 4 maybe, all of the issues disappeared and the system was now working like a well-oiled machine. I reached out to Ring support team and they informed me that there was an automatic update that the brain device was going to perform on its own and that would solve all of the issues I was experiencing. They were indeed 100% correct, after just a few days the system was doing exactly what it was supposed to be doing all along. No issues, no dropped devices, a happy customer here now. If you end up choosing this system and experience issues during the first 3-4 days, please wait a few days for your system to automatically update itself to the latest software and you’ll see the issues magically go away.
The abode Gateway also supports limited local functionality. This is in part thanks to the Gateway’s ability to communicate using its own proprietary protocol called abodeRF. If your internet is down, your automated rules will continue to run, assuming that the devices involved are connected to the Gateway directly and not through a third-party service like IFTTT.
Nest Cam Outdoor’s temperature range is limited to -4° to 104°F. In the same breath, the Nest team warns of placing the camera in direct sunlight to avoid overheating the device. So if the device can only handle 104° and it might heat up in the sun, is it really ready to live outside? Perhaps it’s not that the device isn’t ready to live outside, but that it’s more suited for temperate zones.
3) contact sensors- people complain they are too large-this is true if you plan to use on windows and most your openings, but thats true for any system that is not hard wired, including Nest ‘s contact sensors which are much more $ and only slightly smaller . And the hard wired ones are set into window/door frame- you can do that yourself and hire at least Hal;f the senior (i have chosen to embed with a little chiseling the large part fo the contact and lead the mangnet small part episode on the door; if you want it save yourself soem work and can tolerate a little more obvious appearances, embed the magnet. If this is a big issue for anyoen, just embed one half fo the contact into the doorframe it yield a very unobtrusive appearance.
From the app, you can control and manage your Nest Secure system. Of course, you can arm and disarm your system, but you can also see sensor status as well as sensor history. For example, you can see if your door is open or closed and you can see when it was last opened and last closed. You can also use the app’s Remind Me feature to remind you to arm your system if you forget to do so.
Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere.  Ring Alarm is fully customizable and expands to fit any home or apartment. And with Ring Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app.
×