I love the Ring Video Doorbell, but I’m not a huge fan of their other cameras. However, the wired version of Ring Spotlight works in temperatures ranging from -20°F to 120°F, which makes it an interesting choice for you. I also like my Nest Hello. Nest Cam IQ Outdoor can work in temperatures ranging from -40° to 113°F. That said, if you are opening to drilling during your construction project, which I assume you are, I would recommend exploring PoE cameras, which is a category I need to dig into more. If you go this route, you would more than likely have one app for your cameras and another for your doorbell. As a side note, Ring Video Doorbell Elite is a PoE option.
For a long time, I used my indoor Nest Cam to film through my window. It was a makeshift outdoor camera supplemented by my Ring Video Doorbell. So it should come as no surprise that when Nest Cam Outdoor launched, I jumped at the opportunity to buy it. Since then, my search for an outdoor solution has continued to Canary Flex, Ring Spotlight Cam, Arlo Pro, Arlo Pro 2, Blink XT, Nest Hello, Reolink Argus, Argus 2, and a few that did not make the honorable mention list.
So let’s talk cost for a minute. For $399, Nest includes a Nest Guard which also acts as a keypad, siren, and motion detector, two Nest Detects which are also motion sensors, and two Nest Tags. An equivalent package from abode would cost $479. A comparable package from Ring would cost $279. However, Ring doesn’t sell a key fob, and the kit includes a range extender, so that needs to be factored into the equation.
To test all the professionally monitored security systems out there would too expensive due to the high monthly fees so I usually keep up with them at CES when I can, and Vivint attends CES. I’ve seen all of their cameras including the doorbell in Vegas, but it’s not the same as living with something for months and experiencing the quirks that often come along with longterm ownership. You can read my Vivint review here, but I doubt it’s going to help with the issue you are experiencing. Vivint processes motion events in the cloud. I believe they recommend that customers have a minimum upload speed of 2MBPS.
The abode Gateway also supports limited local functionality. This is in part thanks to the Gateway’s ability to communicate using its own proprietary protocol called abodeRF. If your internet is down, your automated rules will continue to run, assuming that the devices involved are connected to the Gateway directly and not through a third-party service like IFTTT.
After using Flex unplugged for a little over two weeks, the battery fell critically low before getting to the point where the camera would no longer turn on. I don’t blame this on the weather as much as I do the wind. Continued tests showed a battery life of 2-4 weeks. Per a reader request, I retested the camera in August. The weather is warmer here in August, it’s less windy, and Canary has since made several adjustments to help extend Flex’s battery life. This time, the battery lasted a full seven weeks.
My gate is too far from my router so I would prefer to hardwire the doorbell. I would rather not use an extender. I ran CAT5 when I installed my old doorbell (which is now outdated and does not have software to use on my iphone). Is my only option the Ring Elite? I have the Arlo set up indoor, but I was not sure if Arlo was going to make a doorbell. Any thoughts?
Biggest problem though is the ‘wake up’ time. You reported on it, but I didn’t really take the time to really consider, “Hey, if I want to catch the kids driving by banging mailboxes, by the time they drive by and the camera wakes up, they’re gone!’ Well, that’s just what I learned as I set everything up, had the ap working and started getting notifications when people drove by. I thought AWESOME! it works! Well, not so much. Unfortunately, the car is never seen on the video, so the purpose is pretty much defeated.
I have tested Reolink Argus and Argus 2. Both are indoor/outdoor, hubless, battery-powered cameras. The cameras do not offer cloud storage. Instead, you can purchase and add an SD card. The cameras record in FHD 1080p, offer night vision, live streaming, mobile app access, and a 130° field of view. However, they lack other features offered by Canary, Arlo, and Nest including geofencing and the ability to connect to third-party devices.
Ring's professional monitoring isthrough Rapid Response Monitoring Services, and it's one of the more affordable services available. For $10 a month (or $100 a year if paid up front), you get the benefits of dispatchers on standby, and this includes video storage for any Ring cameras you might have. There's no long-term contract, either, so you can cancel any time you don't need it through the Ring website.
Speaking of monitoring, there are different modes that you can set when arming the alarm. When you're at home, there are two choices, including Disarmed and Home. With disarmed, there is no 3rd-party monitoring happening, so you can open and close the doors, windows, and more as you please. Home mode is used for times like when you're home alone or going to bed, and there is external monitoring involved. With Home mode, you can opt to change which sensors are active and which aren't, which is great for if you don't want a motion sensor to go off because of your pets or something.
Aside from the obvious value proposition, Ring’s big pitch for the Alarm system is its simplicity. Though it has all of the features necessary for a proper home security system – professional monitoring, battery and cellular backup for the event of a power loss – installing the Ring Alarm in my home took less than 20 minutes and involved following the app’s instructions to get the base station on my Wi-Fi network and register each included piece. Cleverly, Ring presets the included motion detector, contact sensor, and range extender to pair with the hub that’s in the box, so getting them set up is just a matter of pulling the battery tab to wake them up and waiting a moment for the app to find them.
You will need robust wifi in your house to realize rings full potential/features, but thats true for ANY of its competitors. And for the mechanically challenged they make a plug and play wi fi extender (with a chime for the ring doorbell). NB rings monitoring fees are cheap and it’s hardware warranty very generous . Consider your all in costs over a ten year period -for me came out thousands of dollars less. Ring is owned by amazon so u know they will be there to honor warranty update software technical support etc this is such an easy purchase - no excuse for not having home security system anymore that you control and can customize, take with u when u move
The Alarm system does not have as many bells and whistles as Nest’s system, nor does it have some of the conveniences Nest provides. But at $199 for the starter bundle, which includes the necessary hub, a keypad, a motion detector, a contact sensor for doors or windows, and a range extender, plus $10 per month for professional monitoring, Ring’s system is significantly cheaper than Nest Secure (which was just recently reduced to $399 for its starter kit) and is one of the least expensive home security systems you can purchase.
I installed the Spotlight Cam Wired at the front of my home, where there’s an outdoor outlet within the power cord’s 20-foot range. I put the Spotlight Cam Solar in the backyard, where there’s more unobstructed sunlight. Each camera comes with its own mounting tools, including a screwdriver, drill bit, mounting bracket and screw set with wall anchors.
That said, using abode with a Nest Cam is my recommended solution, and integrating the two provides one major advantage: more free storage for your Nest Cams. The major disadvantage is that even if you are a Nest Aware subscriber, abode can only store snapshots. If you want video clips or continuous cloud access, you will need to pay for Nest Aware to access your footage via the Nest app.
At 3.2 by 0.9 by 0.9 inches (HWD), the Z-Wave contact sensors for doors and windows are bulkier than the sensors that come with the Vivint Smart Home system (2.5 by 1.0 by 0.5 inches). They're each powered by a CR123 battery that is rated to last three years and can be installed using double-sided tape or with mounting screws. The motion sensor (3.5 by 2.4 by 1.7 inches) also runs on a CR123 battery and uses a Z-Wave radio to communicate with the base station. The range extender (3.1 by 1.8 by 1.1 inches) plugs into a wall outlet and extends the Z-Wave signal by up to 250 feet, so you can place sensors just about anywhere.
Ring allows some of the best customization. As a result, it is very common for individuals to be able to pick and choose the features most important to them. You do not have to buy an entire package. Instead, check out this Ring product costs and price list. You can see the cost of each component of the Ring system, and you get to choose what works for your individual needs.
As part of the Ring Protect Plus plan priced at $10 per month or $100 per year, you'll get 24/7 professional monitoring on your Ring Alarm. When your sensors trip and the base station sounds an alarm, after 30 seconds it also sends a signal to Ring's central monitoring system. A support agent will attempt to call you to see if everything is okay, and then tries your emergency contacts if you can't be reached.
Installing the keypad was simply a matter of plugging it in and waiting a few seconds for it to be recognized. I gave it a name and a location, used the included mounting screws to hang the mounting plate on a wall, snapped the keypad into place, created an Access Code for arming and disarming the system, and was done. Installing the motion sensor was just as easy: I removed the battery tape and waited a few seconds for it to be added to the app. I gave it a location and a name, used the double-sided tape to mount it to a wall, and tested the sensor. To install the Z-Wave range extender, I plugged it into a wall outlet between the base station and the motion sensor (the farthest device from the base station), named it, and assigned it to a room. The entire installation took around 20 minutes.
Well, I have not had any problems. This product works as advertised. Video freezes up occasionally but recovers quickly. I did move my router inside the house and went from -61 to -48. Camera resolution is acceptable and the IR emitters work well up to about 20 feet at night. Customer service is good (at least the one time I called them). I recommend this product. ADT installed our system and stand behind their work.
I’ve stayed away from all Ring products as their API is only accessible by large entities they approve of. You are also forced to use the cloud. If they have an outage, it impacts you. In my smart home setup, I’m not reliant on the cloud for many aspects. There are some exceptions, like Nest thermostats and Protects. Alarm system is locally controlled, Z-wave devices are locally controlled as well. If my Internet is down, then remote access and the Nest products is not possible. The rest of the devices continue to work. My video doorbells are locally controlled; no need for the cloud nor their monthly/annual fees. I want to capture images, I can do it locally but also review it remotely.
Through Works with Nest, abode works with Nest Protect, Nest Thermostat, and Nest Cam. Using this integration, you have the option to sync your abode modes with Nest modes or keep them separate. The abode system also offers deep integration with the Nest Thermostats. From the abode app, you can access and control your home’s temperature and create temperature thresholds. The same is true for ecobee users.
By default, Ring Alarm offers three modes: Unarmed, Home and Armed, and Away and Armed. You can use the keypad to change modes, or use the mobile app, which also offers access to any Ring cameras you might have set up in your home. The app also provides status updates on any connected devices you have in the house, a separate history log for the alarm system and the cameras, a settings panel for configuring professional monitoring and what each mode does when activated.
Swann Smart Security Camera is an indoor/outdoor battery powered security camera that works without a base station. It’s most similar to Reolink Argus and Canary Flex. The camera records in 1080p FHD, offers a 120° field of view, night vision, and is IP65 rated for outdoor use. Unfortunately, it doesn’t work with any third-party devices and it lacks intelligent features to reduce false alarms. The camera boasts a feature called True Detect™, but that’s just a fancy marketing term for PIR motion sensor. The camera’s best feature is free local and cloud storage. From the app, you can playback seven days worth footage stored locally. The camera also includes two days of cloud storage.
We've begun having an ongoing problem with car break-ins in our neighborhood. I wanted to get a security cam to monitor our driveway. I looked into standard cctv and more advanced poe/hd cams with a dedicated computer and HDD, but hesitated due to the complicated nature of the installs. Not that I can't do that, but I really wanted a simpler option. Enter the Ring Floodlight Cam. I purchased one to install in place of the motion floodlight over our driveway. I am pleased.