Pricing for add-on components is pretty much in line with what you'll pay if you have a SimpliSafe or Abode system. Extra contact sensors are $20 each, another motion sensor will cost you $30, and a range extender goes for $25. Additional devices including a Smoke/CO detector ($40), a Flood/Freeze detector ($35), and a Dome Siren ($30) are not yet available.
Though the Ring Alarm system covers the bases for a home security setup, there’s a lot of room for integration with other smart home products that Ring has left on the table. For example, it’s not possible to use the Ring’s motion or contact sensors to trigger lights or adjust a smart thermostat when you leave or come back home. This is despite the fact that the Ring Alarm sensors are based on Z-Wave technology, which is a widely used smart home standard.
When you say “full coverage” I’m assuming you mean continuous recording, is that right? Arlo and Nest can record continuously, but only if they are plugged in. Also, the outdoor power cord for Arlo is new and it’s on a pretty long lead time right now. It’s sold separately from the camera. If you could confirm that your new is continuous recording, I’ll dig in a little more, but I don’t want to assume anything before making a recommendation.
Our 50 Series IP Cameras provide top of Our 50 Series IP Cameras provide top of the line picture quality day or night with the convenience of one cable operation and the reassurance of considerable weather and tamper proofing. The 5061IP is a dark gray bullet style internet protocol camera with a varifocal lens intended for use both ...  More + Product Details Close

The Spotlight Cam employs the common method of using bounding boxes over the camera image to define detection zones, but you can use the box handles to twist it into any kind of geometric shape, not just squares. That allows you to work around outdoor areas where you don’t have as much control over the environment as you do inside your home. There’s also a scheduling option to disable motion alerts during certain times of day.
You can add additional Ring door/window sensors and motion sensors to scale up the system as needed; the kit also works with a FirstAlert smoke and carbon monoxide detector. But that's about it, for now. Ring plans to add additional sensors at a later date and has hinted at upcoming partnerships with major third-party platforms like Alexa and Google Assistant. But considering Amazon bought Ring back in February, this system should really already work with Alexa and the Amazon Cloud Cam (it doesn't).
The abode Gateway also supports limited local functionality. This is in part thanks to the Gateway’s ability to communicate using its own proprietary protocol called abodeRF. If your internet is down, your automated rules will continue to run, assuming that the devices involved are connected to the Gateway directly and not through a third-party service like IFTTT.
Ring, an Amazon company, also sells several security sensors. First is the keypad. The keypad runs on battery power, and you can wall mount it or place it on a flat surface. In addition to arming and disarming your system, the Keypad Control Panel allows you to choose between Armed Away and Armed Home. When using the keypad to arm your system, it provides a grace period to reduce false alarms. You can customize the grace period using the mobile app. Finally, you can simultaneously press and hold the check and x buttons for three seconds to trigger the panic alarm.
The Ring Doorbell Camera security system was acquired by Amazon. They currently offer doorbell cameras and exterior security lighting cameras. And according to their website product page, Ring will soon be adding indoor security and environmental protection products to their lineup as well. This is great news based on how popular their current products have become.
Finally, at times the app is slow to connect to the system. For the most part, this isn't an issue, but I've run into a few situations where my kid opened the door to help me out and the alarm started sounding and it took up to 30 seconds for the app to connect to the alarm system. Luckily, I have had enough time in my entry delay period to get it disarmed before the monitoring company was notified, but I'd like to see the app delay disappear.
WINNER Nest. While Nest Aware is a more expensive service, advanced features like person detection combined with the ability for the camera to record 24/7 make it a better overall home security camera. However, Arlo with Arlo Smart is also a contender as the service is less expensive and the camera includes free storage. You can also add continuous video recording to Arlo Pro 2, but only if using the camera plugged-in indoors. You can compare Arlo and Nest’s CVR plans here. Ring will also soon add continuous recording, but only if you have a wired Ring camera.
3) contact sensors- people complain they are too large-this is true if you plan to use on windows and most your openings, but thats true for any system that is not hard wired, including Nest ‘s contact sensors which are much more $ and only slightly smaller . And the hard wired ones are set into window/door frame- you can do that yourself and hire at least Hal;f the senior (i have chosen to embed with a little chiseling the large part fo the contact and lead the mangnet small part episode on the door; if you want it save yourself soem work and can tolerate a little more obvious appearances, embed the magnet. If this is a big issue for anyoen, just embed one half fo the contact into the doorframe it yield a very unobtrusive appearance.
Unlike the other options, Ring cameras don’t integrate with the security system. Sure you can monitor them all using a single mobile app, but there is no “if this, then that” relationship. If your alarm sounds, your cameras will not record. If your cameras detect motion, they won’t trigger your alarm. However, there is one major benefit to using Ring cameras: If you pay $10 per month, you will gain access to cloud storage and professional monitoring with cellular backup.

Two days later we had the Ring alarm and a Ring doorbell in hand. The whole setup took less than 20 minutes (including the doorbell). Plug in the parts, stick sensors to doors, use the app to walk through configuring them, and you're done. A few minutes later I had the professional monitoring set up. I spent a few minutes familiarizing myself with the features, adjusting alarm volume, adding user codes, etc. It was all just so seamless.


Once devices are added, you can create rules through abode’s built-in automation engine which they call CUE. CUE works similarly to IFTTT in that you can create rules in an ‘If This Then That’ format, but it takes things a step further by allowing you to create an optional condition. For example, if the front door is closed, lock the front door, but only if it’s dark outside.
True. I do feel like I touched on most of my “what’s best” thoughts in the Final Thoughts section. I would take from abode the free and vast integrations which extend to its ability to work with so many security-related devices (glass break sensors, flood sensors, freeze sensors, key fobs, etc.). I would also take their optional on-demand monitoring plans, free cloud storage, and geofencing. I would take from Nest their fabulous camera technology, design, and overall experience (voice prompts, clean app experience, etc.). From Ring, I would take pricing and extended battery backup.
I haven’t had that problem, and as you said, I’m running it hardwired. My clips include a front facing image of guests. That said, I’ve recently had issues with wake up times when I’m away from home. As an example, I answered a ring alert yesterday, but it just kept spinning. I had to hard close the app, open it back up, and then check the alert. By then, the guest was gone.
We went with SimpliSafe instead. I don't have any experience with their newest version, but their "version 2" which is still for sale has been flawless for the ~4-5 years we have had it. Never a false alarm and more importantly, NEVER a "can't connect to base station ..." error. It is $15/month for monitoring through SimpliSafe, but I'll gladly pay $5 more a month for reliability.
In terms of larger home integration, Nest is the very definition of a smart device. Its Works with Nest program automatically instructs connected products (such as smart lighting and thermostats) to perform their tasks without you having to tell them what to do. It’s an exceptionally hands-off solution, though you can still tweak it with custom preferences.
As part of the Ring Protect Plus plan priced at $10 per month or $100 per year, you'll get 24/7 professional monitoring on your Ring Alarm. When your sensors trip and the base station sounds an alarm, after 30 seconds it also sends a signal to Ring's central monitoring system. A support agent will attempt to call you to see if everything is okay, and then tries your emergency contacts if you can't be reached.
After the hardware itself is set up, you can pretty much forget it's there, except for the keypad. You won't need to adjust the sensors regularly or clear alerts on them, everything you do from here on out is done via the app or keypad. It's worth noting that since the sensors aren't hardwired, you will need to change the battery at some point, though Ring says that the included batteries should last for up to three years with normal usage.
Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.
×