It would have been nice to see more smart-home integration between the Ring Alarm and other well-established third-party names, if only because the company has already set such a precedent for itself in this area. Buying it won't introduce any new tricks to an existing Ring doorbell, either, but if you're already in the ecosystem and you're looking to expand, this $200 starter kit is a sure fit.
Regardless of whether you go the adhesive or hardware route, Ring provides everything you need right in the box, with installation kits for each component of the system conveniently boxed and labeled to make it easy to find what you need. All you'll need if you want to use the included screws and anchors for hardware mounting are a screwdriver and a drill.
At two months, Arlo’s battery lasted longer than Canary’s. Arlo also sent both an email and push notification encouraging me to charge the camera. I tried to time how long it took to recharge the battery, but it took five hours to reach 87% and then stopped. Even the next day, the camera’s battery did not charge beyond 87%. Also, like Canary, Arlo’s battery life was impacted by activity more than weather. The camera I placed in a lower traffic zone had 37% battery life remaining after two months and several sub-zero days.
Hi Rose! Thank you for such an informative article. Unfortunately, I’m reading due to the fact that my street was just the victim of car break-ins overnight. I am curious to know what your opinion on the night vision (inside and out) for each of the cameras is. I currently have the older Logitech Alert cameras, but their night vision isn’t the greatest so I really couldn’t make out the burglars or the vehicles they were in. I have been leaning on Ring doorbell/stick ups, but no 24/7 recording is almost scaring me away.
Installing the Ring Alarm system is easy thanks to the well-written getting started guide. I already had a Ring account, but if this is your first ring device, start by downloading the Ring app and creating one. I opened the app and tapped Add a Ring Product, selected Alarm from the list, and confirmed my location. I plugged in the base station and pressed the pairing button, which started the blue LEDs spinning, indicating that the station was in pairing mode. I tapped Find My Base Station in the app and selected Wi-Fi as my internet connection method (you can connect via Ethernet or Wi-Fi), selected my router's SSID, and entered my Wi-Fi password. The LEDs flashed white momentarily before turning solid blue and the Wi-Fi indicator turned green, indicating a successful pairing. The app also confirmed the connection.
The base price of the Nest Secure will set you back $399. Included in that cost is one alarm, two Nest Detects (a sensor that keeps tabs on doors, windows, and rooms), and 2 Nest Tags (an arming/disarming device that doesn’t require a passcode). As for the Ring Alarm, it will cost you $199, and the price includes one base station, one keypad, one contact sensor, one motion detector, and one range extender. The Ring Alarm is definitely the more affordable option, and you get more components — and thus, flexibility — for the price.
Once you're logged in, follow the straightforward prompts to connect each accessory. This was one of the easiest security system setups I've ever encountered; literally pull the battery tab on the battery-powered door/window sensor and motion sensor and plug in the base station, the keypad and the Z-Wave range extender, and they automatically connect to the app.
Nest Secure’s monitoring service is provided by Brinks Security. Originally, service was offered by MONI before MONI, LiveWatch, and Brinks merged to form the Brinks brand. Monitoring of Nest equipment through Brinks is $29.00 per month plus the cost of equipment. If purchased through Brinks, equipment is only $299 for Nest Guard, two Nest Tags, and two Nest Detect Sensors. If you want a discount on Nest Secure services, your only option is to sign a contract. With a three-year contract, you’ll pay $19.00 per month; equipment remains at $299.
Use the Device Health button to view signal strength, firmware version, and the current Wi-Fi network you are connected to, and the Linked Chimes button lets you enable motion settings for any Ring Chime devices you may have installed. Motion Settings lets you adjust sensitivity using the slider, create detection zones, and set up schedules for enabling/disabling motion alerts, and Motion Snooze lets you temporarily turn off alerts. Tap the Shared Users button to invite friends and family to view video clips, and the App Alerts Tones button to assign one of a dozen sounds to play when motion is detected.
I had a sufficiently strong signal from my router to each camera, but results will vary depending on the layout of your home. If you do see streaming issues, such as resolution deterioration or loss of signal, you might need to install the camera closer to your router or use a Wi-Fi range extender, such as the Ring Chime Pro Wi-Fi range extender ($49 at Amazon). Like its cameras, Ring’s range extender is an 802.11n device that operates on the 2.4GHz frequency band only.
If you opt for the rechargeable battery, you have to either disable the device every time it needs a charge or buy an extra battery. The battery is also a pain in the you-know-what to get out. Ring uses special screws that require a specific screwdriver head to remove. It comes in the package with the camera, but even so, you have to track down that one specific screwdriver every time you need to remove the cam.
Download the Ring app (available for both iOS and Android) and connect the Alarm with your existing Ring devices, or, if this is your first Ring product, follow the instructions and advice on how to get started. Both the app and written materials in the box provides helpful suggestions on how and where to set up your motion sensors and contact sensors.
Installing the sensors was similarly easy: I used the included double sided tape to mount the contact sensor to my front door and the motion sensor to the corner of the downstairs living room in my home. Ring also includes the necessary screws and wall fasteners for a more permanent installation, but the double sided tape was sufficient for my needs. For this review, I added two extra contact sensors (available as $20 add ons) and mounted them on a window and second door in my home. Syncing these with the existing system was just a matter of scanning a QR code on the back of the sensor, which triggered the app to search for it. Ring says that it will preset any additional devices you order at the same time as the Alarm starting kit, which would make setting them up as seamless as the in-box sensors.
Before we get ahead of ourselves, how did Ring become a giant in home security now worth over $1 Billion? They started out as 'Doorbot' and failed getting an investor on Shark Tank. While this could have been a low blow to the company, they pursued the smart doorbell camera and became the leader of it (Vivint to follow in 2nd). Richard Branson chimed in with a large investment and that really got the company going. Fast forward some years and now they are in thousands of stores and in neighborhoods across the nation.
During my extensive research for a cost-effective security solution in 2017 I compared various offerings from different vendors. The Ring was one of the 3 that made my list.Once Ring ceased sales because of a lawsuit, I decided to wait instead of deciding on the other 2 home security solutions because Ring was the cheaper of the 3. I waited and pre-ordered soon as I got the long awaited email and I'm glad I did because it is worth it! The setup up was simple and I was up and running within minutes. Placing the sensors is key and the provided adhesives make the installation quick, if you do not want to use the mounting screws. The modes are helpful (Unarmed, Home and Away). Even if your system is on the 'Unarmed' mode, you still continue to receive alerts in the Ring App on activity from the Motion and Door/Window Sensors. I added an extra range extender which was very easy to add and took less than a minute to be adopted into my system. The range of the devices quiet well, I'm getting coverage for a 1200 square foot area just without the extender. The sensors light up when it senses activity and a ping is heard on the base station. You can adjust the volume for the base station so it is not too loud. Highly recommend this because it is user-friendly, and the sensors work great. Ring support is always there to assist if you need help.
The other thing of note is its lack of smart home partners. Despite being owned by Amazon, Ring's system doesn't work with Alexa or any other major smart home platforms. If you want to arm and otherwise get the status of your home security system via voice commands, the Ring Alarm Security Kit isn't the right option for you. Ring does specify in its support section that it's working on these integrations for a future release.