Using a Family Account, you can share access with nine other people. However, Nest’s sharing feature is problematically one-size-fits-all. All members will have full control over your account, including all cameras and connected devices such as thermostats and smoke alarms. As an example, I gave my family access to a camera placed at my grandmother’s. They can now view the camera at my grandmother’s and also the camera at my house. There is no way to limit their access. Also, they can’t set their own notification preferences, so they either have to put up with all the notifications from my house, or I have to turn off my notifications.
If you opt for the rechargeable battery, you have to either disable the device every time it needs a charge or buy an extra battery. The battery is also a pain in the you-know-what to get out. Ring uses special screws that require a specific screwdriver head to remove. It comes in the package with the camera, but even so, you have to track down that one specific screwdriver every time you need to remove the cam.
Ring suggests that the motion detector should be placed in a location with a good view of a high-traffic area likely to be passed by any intruders, with the detector placed about seven feet off the floor. Motion detection sensitivity can be adjusted in the app if you find you're getting too many false alerts such as from a pet. The detector can be mounted using either adhesive or included screws that attach a bracket to the wall for easy removal of the detector itself.
All these new DIY systems pretty much rely on cellular and/or Wi-Fi. It seems that although it makes things more accessible, cheaper and easier to install, that’s where most of the glitches, or inconsistent alarm notifications come from, right? But in general it’s good that these systems have been made available for us all to choose from. Thank you for helping us navigate all the choices.
The Ring Doorbell Camera security system was acquired by Amazon. They currently offer doorbell cameras and exterior security lighting cameras. And according to their website product page, Ring will soon be adding indoor security and environmental protection products to their lineup as well. This is great news based on how popular their current products have become.
Meet Oco next generation Full HD Home Monitoring Meet Oco next generation Full HD Home Monitoring Camera with SD Card and Cloud Storage. Monitor everything you care about: your home children pets elderly parents business etc. Setup Oco2 in less than 60 seconds and access Full HD video remotely with our App. No Monthly Fees required to activate ... More + Product Details Close
On the downside there is no way to enable/disable video motion detection clips in sync with the armed status. I only want certain cameras to record when armed stay or away. They really need the option to tell the cameras when to record and when not to record. Other than that the 2-way camera communication is spotty at best, but not really a feature that’s important to me. Adding live video to the online access would be a BIG plus too (currently you can only access the cameras through the app).
If you're set to Home and Armed and you trigger an entry sensor that's fitted anywhere but your front door, the base station will sound a piercingly loud 104-decibel alarm until you can get to the keypad, or to your phone to deactivate it. If you're Away, both the motion and the entry sensors will trigger the alarm — unless, again, the entry sensor is affixed to the front door, in which case it will start a 60-second countdown until you enter your PIN (you can adjust the timer as you need).
Arlo Pro can be used outdoors only if running on battery or solar power. (While they once sold an outdoor power adapter, it is no longer available due to quality issues.) If you’re using battery power, you will have to charge your camera indoors as the included power adapter is not rated for outdoor use. Furthermore, if your battery is too cold from being outside, you might have to wait for it to warm up before you can begin to charge it. If you don’t like the sound of that, you can invest in the $59.99 Pro Charging Station and an additional rechargeable battery ($49.99). You can use the charging station to charge two batteries simultaneously so that you always have one ready to go when needed. You can also purchase the Arlo Pro UV-resistant silicone skins, which provide added protection against condensation and sun glare.
Being a cautious optimist, I first followed the app instructions; this was a mistake. Unfortunately, the app instructions are incomplete and leave out important details. Next, I moved on to the included instruction manual where I learned that the first step of the installation process is to fully charge Spotlight’s battery. Unfortunately for me, it was too late for that. The app also skipped another essential step found in the instruction manual: mounting position.
If a monitored door or window is left open when you arm the system, Ring Alarm will warn you, but give you the opportunity to push an illuminated button on the keypad to bypass that sensor. You’ll get a similar warning and opportunity when using the app to arm the system. The sensor will remain bypassed until you disarm the system again. It’s a convenient feature: If you left the upstairs window open, for example, but are in too much of a rush to run up and close it, you can take a calculated risk and secure the rest of the home.
The Ring Alarm is controlled using the same mobile (Android and iOS) and web app as other Ring devices, such as the Ring Video Doorbell Pro, the Ring Floodlight Cam, and the Ring Spotlight Cam, but at the time of this review, the Alarm system does not interact with these (or any) Ring devices, nor can you pair it with just any Z-Wave or Zigbee device unless it is part of the Ring network, which is quite limited at this point.
The base station connects to Ring Alarm devices using Z-Wave Plus. In theory, it could also connect to third-party devices using the same as well as Zigbee, Wi-Fi, and Bluetooth; however, it cannot currently connect to other devices besides the First Alert Smoke and Carbon Monoxide Alarm. Like abode and Nest, Ring’s Base Station includes battery backup, an integrated siren (104db), and a cellular chip which you can activate by paying just $10 per month. Finally, while you can connect to the Base Station via Ethernet, it’s not required.
Swann Smart Security Camera is an indoor/outdoor battery powered security camera that works without a base station. It’s most similar to Reolink Argus and Canary Flex. The camera records in 1080p FHD, offers a 120° field of view, night vision, and is IP65 rated for outdoor use. Unfortunately, it doesn’t work with any third-party devices and it lacks intelligent features to reduce false alarms. The camera boasts a feature called True Detect™, but that’s just a fancy marketing term for PIR motion sensor. The camera’s best feature is free local and cloud storage. From the app, you can playback seven days worth footage stored locally. The camera also includes two days of cloud storage.
Setting the Ring to away will trigger a customizable countdown timer (from 30 seconds to 3 minutes), to give you time to cancel the alarm or exit the home. It will then push a notification to your phone when the system is armed, as well as announce audibly through the base station and keypad in the home that it has been armed. The system will also push notifications when the alarm is triggered via motion or through an entryway, as well as when it’s disarmed. In my experience, the push notifications were near instant to my device, but I would not want to rely on them in lieu of the professional monitoring, as they would not reach me if my phone had no service or was otherwise inaccessible. The only thing Ring is missing compared to a system from ADT is the ability to detect when a glass windowpane is broken, though it’s worth noting that Nest’s Secure system doesn’t offer this feature either.
I know the doorbell works because I have a rule that runs on the doorbell. I know the alarm does not work with IFTTT. Now I’m questioning my assessment of the Spotlight. I can’t remember if I actually used an IFTTT recipe with it or just assumed there was one. I gave the camera to my dad so I’ll have him check and then update the article if needed. Thanks for the tip!
I’ve stayed away from all Ring products as their API is only accessible by large entities they approve of. You are also forced to use the cloud. If they have an outage, it impacts you. In my smart home setup, I’m not reliant on the cloud for many aspects. There are some exceptions, like Nest thermostats and Protects. Alarm system is locally controlled, Z-wave devices are locally controlled as well. If my Internet is down, then remote access and the Nest products is not possible. The rest of the devices continue to work. My video doorbells are locally controlled; no need for the cloud nor their monthly/annual fees. I want to capture images, I can do it locally but also review it remotely.
We installed two new Floodlight Cams, one over the garage, and one in the backyard. Easy installation into existing Floodlight box. After installation, we had a problem connecting. We just call up support and they walk us through it within minutes. Great compliment to our Ring Video Doorbell Pro. We love it so much, our daughter got one, and we monitor their house too.