If you already have a Ring doorbell or security camera, the integration is quite seamless, and the value becomes even better on the annual costs. Ring charges $30 a year per camera on the regular subscription, so if you've been holding out on adding to your system, this may push you over the edge. The company has plans to offer additional sensors in the future, like smoke and CO sensors, water sensors, and more, which will only help make it even more robust.
Quiet Open allows you to bypass an armed sensor simply by touching it. For example, if your system is armed, but you want to check the weather outside, you can press the sensor, and open your door. While I’ve heard only praise for this feature, my initial reaction was that it seems like a security flaw. Your teenagers, for example, can press the sensor and sneak out. Furthermore, there is no identification tied to using the feature. For example, it won’t say, “Rose bypassed the sensor.” Fortunately, you can turn this feature off if you’re concerned.
The battery version of the camera can only use a battery. You can’t plug it in. According to Ring, the batteries should give you six months of life before needing to be recharged, but that wasn’t my experience. After testing the battery for three weeks, my battery level dropped from 100% to 47%. It was depleted before the two-month mark. If you plan to use a battery, I suggest buying two. As mentioned in the installation guide, Spotlight Cam ships with one battery, but it supports two. This configuration will improve your camera’s uptime. When one battery dies, you can charge it while battery two kicks-in to power your camera. Ring sells additional batteries for $29.
Ideally suited for the darker nooks on your property that are susceptible to breach after sundown, it comes in four models: Spotlight Cam Wired ($199), Spotlight Cam Battery ($199 at Amazon), Spotlight Cam Solar ($229), and Spotlight Cam Mount ($249 at Amazon). The cameras in all four models are the same. The Battery and Solar use the same battery; the latter just comes with an included solar panel that can also be purchased independently ($49 at Amazon).
Ring’s motion sensors and contact sensors are much more traditional than Nest’s, which cleverly combine the two into a single device that also adds a nightlight. Nest’s base station also combines the keypad with it and adds even more motion detection sensors – Ring’s separate base station and keypad approach is almost clumsy in comparison. But it is possible to add multiple keypads to the Ring system, so you can have one at each entry way or in your bedroom if that’s a more convenient place for it. The keypad can be placed flat on a table or mounted to the wall, and uses a simple MicroUSB cable for power. Its internal battery lasts between six and twelve months, according to Ring, so it’s possible to install it in a location that doesn’t have an accessible power outlet and just charge it occasionally.
Ring's professional monitoring isthrough Rapid Response Monitoring Services, and it's one of the more affordable services available. For $10 a month (or $100 a year if paid up front), you get the benefits of dispatchers on standby, and this includes video storage for any Ring cameras you might have. There's no long-term contract, either, so you can cancel any time you don't need it through the Ring website.
The Ring app will automatically detect the rest of the items that came pre-packaged with the base station once its initial set up is complete. You'll need to pull plastic tabs on each piece so that they can power up, and you'll want to do this one at a time. If you pull all the tabs at the same time, the system tries to connect to multiple devices at once and slows down the setup process.
Like the hardware, Ring’s Protect Plus service is significantly less expensive than other options. It costs $10 per month and has no long term contract commitments. Nest offers a similar service, but it starts at $19.99 per month with a three-year contract and jumps to $29.99 per month if you opt for no commitment. ADT, one of the largest traditional home security services, has plans that start at $28.99 per month and requires a three-year commitment.
If you already own or are considering investing in any of Ring's security cameras or doorbells, the Ring Alarm will eventually tie all of your devices together in a seamless home security solution. For now though, if you want a DIY home security system that offers lots of add-on devices, including an indoor camera, the SimpliSafe Home Security System is your best bet and remains our Editors' Choice for DIY security systems. If you want a system that is big on home automation, check out the Abode Home Security Starter Kit, another Editors' Choice winner. As with the Ring Alarm system, it offers multiple wireless radios, but it already works with plenty of third-party devices, has its own IFTTT channel, and supports Alexa voice commands.
In terms of larger home integration, Nest is the very definition of a smart device. Its Works with Nest program automatically instructs connected products (such as smart lighting and thermostats) to perform their tasks without you having to tell them what to do. It’s an exceptionally hands-off solution, though you can still tweak it with custom preferences.
If you opt for the rechargeable battery, you have to either disable the device every time it needs a charge or buy an extra battery. The battery is also a pain in the you-know-what to get out. Ring uses special screws that require a specific screwdriver head to remove. It comes in the package with the camera, but even so, you have to track down that one specific screwdriver every time you need to remove the cam.
Ring offers a full line of security cameras. These provide more protection and are not limited to just the doorbell area of the home. The security cameras range in overall function and features. The company’s security cameras all come with HD video, which ensures a high quality view every time. They also feature two-way talk features, lights, as well as sirens to alert the area. You can choose to link into them through your app or you can use any pc. Here is a look at some of the options.
It was 20*F outside when I installed the cam. I didn't want to be running up and down a ladder if I had problems connecting to the network. I wired the cam up with a plug (from an old, grounded extension cord) and ran the wifi setup routine at my kitchen table. I verified everything was working (including the app, motion detection, etc.) before I installed it outside.