Hi and thank you for the exhaustive review. I like the option of Ring Doorbell Pro. However, my existing doorbell is on the side of the house, facing parallel to the door across the front steps. If I mounted the Ring there, the camera would capture a profile of the visitor as they approach the door. It would not capture their face head on, would not (likely) capture them them as they approach the steps, which is where delivery people often leave packages (my interest in Ring, Arlo, etc., came out of the neighborhood social app conversation about a rash of package thefts), and would not capture the car they drive as it would face parallel to the street, not into the street. My question is: what would the installation of Ring look like on or near the front door, where there is no existing wiring? Is my existing setup enough to steer me away from Ring and toward a battery powered option?
The door/window sensors (also called contact sensors) work pretty well, but the same cannot be said about the motion sensors; they will detect motion after there’s been plenty of movement (if I walk the hallway and enter a room it will not detect, but if I sit for a few seconds moving in the hallway it will detect it then). This is still not a show stopper for me, as I have a dog and don’t plan on buying any more motion sensors, it will be all contact sensors.
Once devices are added, you can create rules through abode’s built-in automation engine which they call CUE. CUE works similarly to IFTTT in that you can create rules in an ‘If This Then That’ format, but it takes things a step further by allowing you to create an optional condition. For example, if the front door is closed, lock the front door, but only if it’s dark outside.
The device shipped ready to be mounted on an eave, but I decided that I wanted to mount it on a wall. To do that, you have to swap the mounting plate from an upward facing to a downward facing position. What I learned while doing so is that Ring fails to mention that the device does not ship with the security screw already in place so even if the mounting plate is already in the position you want, make sure to check on the security screw. Instructions on removing the mounting plate are found on page 15 of the included instruction manual.
Installing the Ring Alarm system is easy thanks to the well-written getting started guide. I already had a Ring account, but if this is your first ring device, start by downloading the Ring app and creating one. I opened the app and tapped Add a Ring Product, selected Alarm from the list, and confirmed my location. I plugged in the base station and pressed the pairing button, which started the blue LEDs spinning, indicating that the station was in pairing mode. I tapped Find My Base Station in the app and selected Wi-Fi as my internet connection method (you can connect via Ethernet or Wi-Fi), selected my router's SSID, and entered my Wi-Fi password. The LEDs flashed white momentarily before turning solid blue and the Wi-Fi indicator turned green, indicating a successful pairing. The app also confirmed the connection.
Oco Pro Cloud Video Surveillance Camera is easy Oco Pro Cloud Video Surveillance Camera is easy to use HD Wi-Fi camera with Cloud and SD card Recording for monitoring everything you care about: business home children pets elderly parents etc. No Monthly Fees required to access all camera features. Self-learning motion detection system helps Oco understand motion and ...  More + Product Details Close

I'll be the first to admit, the thought of installing the alarm system on my own was a bit scary, and I didn't know that I would be able to get it done. I'm not exactly the handiest person, and my wife doesn't like things to be messy in our brand new house. Ring does an incredible job at making the unboxing experience extremely easy by labeling everything so you exactly what goes with what. In just under 90 minutes I was able to get everything out of the box and set up, including mounting the hardware.
The picture isn’t quite as rosy if you’re also looking for a full-fledged smart home system. Ring Alarm is positively capable of being a great smart home controller. But it’s not that today. And to be fair, Ring isn’t promising that it ever will be—at least not officially. But they wouldn’t have built in Z-Wave, ZigBee, and whatever that third mystery radio is if they didn’t intend to go down that path.
Once the base station is online and your account set up for monitoring, the rest of the devices in your starter kit are automatically identified in the Ring app and you can set them up one by one. With each one, you can provide a name and room location to help identify the accessories in notifications and the app. With the keypad, you'll set up an access code that lets you arm and disarm the alarm, and you can set up different codes for different people. As you set up each motion detector and contact sensor, the app will have you test each one to ensure that they're probably detecting events.
While setting the system up, my motion sensor got hung up and wouldn't stop detecting motion. I had to reset it, which I did through the app, but since it was part of the kit, the process was a little different than the app stated. This was a minor annoyance, but worth noting that if you ever run into an issue with any of the pieces that come with the kit, you'll need to do a full reset of that piece so that the base station can see it again.
A couple of important things to note during setup. First, for the contact sensor, be sure to have the magnets aligned, otherwise it won’t work. We learned this the hard way after spending an hour troubleshooting. Second — and this is really important – depending on where you live, you may need to get a permit for the system from a local government agency. Ring helps you navigate through this process by looking up your address and telling you whether a permit is required.

I had a question as I am looking for a camera system to use for my outdoors. I have blink for inside and am plenty happy with it, but want something better for outside. I really wanted to go with Ring, but was disappointed with the integration available. Then I looked closer and from what I understand there is no way to turn off recording. Is that correct? That is fine maybe for the front of my house, but who is going to want a system in their home or in their backyard that they can not stop recording. This leads into serious issues about privacy to me.
Most of my setup time was spent testing the position of the three contact sensors I received. The magnetic sensors consist of two parts. One part goes on a door or window frame, the other part goes opposite it so that when the door or window is opened, the magnetic connection is broken. If the two pieces aren't close enough, roughly half an inch, the sensor doesn't work.

4) Motion detector- again people say they are large ; but they are SMALLER than hard wired motion detectors I have - the differenc is the hard wired ones are embeddded itnot the drywall (but you can do this with the smaller ring detectors Too if you want. You can buy a plate to finish off the drywall edge of the small “cubby:” you create OR just buy some trim at Home Depot that matches your current baseboard or ceiling/door trim , buy a plastic miter box for $10 and make 45 degree cuts and you have your custom tight frame ready to paint (ANYONE can do this !) and you can locate the motion detectors anywhere you have a drywall wall ! Compared to any wireless motion detector than nest they arent that large -nest ones are 50% more $ and they are nots o small as to go un noticed anyway !
Canary also allows you to share access with other users. Through the Canary app, all users will have full control over your cameras. If you want to limit other users’ access, you can choose who has access to what camera through the use of multiple locations. For example, you can give person A access to location 1 but not location 2. Better still, locations can be at the same address so your location 1 and location 2 can both include cameras in your home.

I'm a Ring user, with a Video Doorbell 2 and a Floodlight Cam already installed at my house, but I don't have any prior experience with home security systems. That made for a bit of a learning curve just in terms of figuring out how I wanted to set things up and remembering to arm/disarm the system at the appropriate times. But Ring Alarm is intended as a simple do-it-yourself system that makes it easy for even novice users to get up and running, so perhaps I'm an ideal candidate for testing things out.
Ring makes sure that no matter your experience level, you're empowered with information. The minute you open the box, there are neatly packaged containers with nearly every component needed to install the kit. Before you do any of that, however, you'll have to add each device through the Ring mobile app, which is extremely straightforward — all you have to do to start setting up accessories is tap the button that says "Set up a new device."
4) Motion detector- again people say they are large ; but they are SMALLER than hard wired motion detectors I have - the differenc is the hard wired ones are embeddded itnot the drywall (but you can do this with the smaller ring detectors Too if you want. You can buy a plate to finish off the drywall edge of the small “cubby:” you create OR just buy some trim at Home Depot that matches your current baseboard or ceiling/door trim , buy a plastic miter box for $10 and make 45 degree cuts and you have your custom tight frame ready to paint (ANYONE can do this !) and you can locate the motion detectors anywhere you have a drywall wall ! Compared to any wireless motion detector than nest they arent that large -nest ones are 50% more $ and they are nots o small as to go un noticed anyway !
The abode Gateway also supports limited local functionality. This is in part thanks to the Gateway’s ability to communicate using its own proprietary protocol called abodeRF. If your internet is down, your automated rules will continue to run, assuming that the devices involved are connected to the Gateway directly and not through a third-party service like IFTTT.

All of these limitations make the Ring Alarm feel less like a cohesive part of an integrated smart home and more like a bolt-on appendage that requires its own app and accessories. For its part, Ring says that smart home integrations are coming, but it wanted to make sure that it had nailed down the security aspect of the system before adding to it. The company says it plans to add integrations with lighting, door locks, and other smart home gadgets down the road, but it wouldn’t provide a timeline for these options when I asked.

I have tested Reolink Argus and Argus 2. Both are indoor/outdoor, hubless, battery-powered cameras. The cameras do not offer cloud storage. Instead, you can purchase and add an SD card. The cameras record in FHD 1080p, offer night vision, live streaming, mobile app access, and a 130° field of view. However, they lack other features offered by Canary, Arlo, and Nest including geofencing and the ability to connect to third-party devices.

From the app, you can control and manage your Nest Secure system. Of course, you can arm and disarm your system, but you can also see sensor status as well as sensor history. For example, you can see if your door is open or closed and you can see when it was last opened and last closed. You can also use the app’s Remind Me feature to remind you to arm your system if you forget to do so.
Be prepared with a Ready America Cold Weather Be prepared with a Ready America Cold Weather Survival Kit. Our two-person kit contains essential lifesaving items including food and water survival blankets body warmers and hand warmers a snow shovel to dig your vehicle out of tight spots a flashlight/radio/cell phone charger and more. When winter comes cold weather ...  More + Product Details Close

Think of Smart Alerts as the ability to control alert frequency. You can request to receive more alerts, “standard,” or “light” (fewer alerts) or choose to turn notifications off from the app’s main screen. You can also snooze motion alerts for a set period of time. Once snoozed, you won’t receive motion alerts, but motion events will continue to upload to the cloud. Besides snoozing motion, you can also snooze your Ring Chime or your Chime Pro.
I'm a Ring user, with a Video Doorbell 2 and a Floodlight Cam already installed at my house, but I don't have any prior experience with home security systems. That made for a bit of a learning curve just in terms of figuring out how I wanted to set things up and remembering to arm/disarm the system at the appropriate times. But Ring Alarm is intended as a simple do-it-yourself system that makes it easy for even novice users to get up and running, so perhaps I'm an ideal candidate for testing things out.
Ring is owned by Amazon, so we fully expected to be able to have our security system chatting it up with our Amazon Alexa and other smart home devices. But that’s not the case, at least not yet. We spoke to Mike Harris, Ring’s President of Ring Solutions, and he said that Ring wanted to focus on security first and foremost, as well as getting people comfortable with the system, before introducing integration with other products. But users can expect integration that already exists to be activated soon.
FAST FREE USPS PRIORITY SHIPPING WITH TRACKING INCLUDED. SAME DAY PROCESSING IF PAID BY 5PM EASTERN TIME ZONE MONDAY THRU FRIDAY EXCLUDING HOLIDAYS. Up for sale a Used Ring Stick Up Cam Wire Free Outdoor Security Camera. The device works perfectly, but has some marks on exterior as seen in picture. This kit comes with new never used mounting hardware as well as seen in pictures.
If you think about it, all of these cameras are magnetic meaning that anyone can steal them or knock them offline. The only way to stop this is to mount the camera high enough that an average person cannot reach them. In doing this, it means the battery cameras require you to get out a tall ladder to replace or recharge the battery where with the nest, once you run the power cord and its plugged in, you for a lack of a better phrase, “you set it and forget it.”
Just as heads-up, customer support from Ring was top-notch. After a week of use, I had an issue with a sensor that wasn’t communicating properly. Fortunately it didn’t trip the alarm (I say fortunate as I wouldn’t want to local police to show up for faulty sensor). A late night call to the Ring customer service, which appears to be U.S. based, helped to resolve the issue. The rep was professional and patient. All told, I’m glad I chose Ring.
Our 50 Series IP Cameras provide top of Our 50 Series IP Cameras provide top of the line picture quality day or night with the convenience of one cable operation and the reassurance of considerable weather and tamper proofing. The 5061IP is a dark gray bullet style internet protocol camera with a varifocal lens intended for use both ...  More + Product Details Close
×