Other “Family” Devices Arlo Wire-Free, Arlo Q, Arlo Go, Arlo Baby, Arlo Pro 2, Arlo Security Light, Arlo Audio Doorbell (coming soon) Arlo Wire-Free, Arlo Q, Arlo Go, Arlo Baby, Arlo Pro, Arlo Security Light, Arlo Audio Doorbell (coming soon) Stick Up Cam, Solar Panel, Ring Chime, Floodlight, Ring Doorbell, Ring Protect, Ring Beam Solar Panel, Ring Chime, Ring Doorbell, Floodlight, Spotlight, Ring Protect, Ring Beam Nest Cam, Nest Cam IQ, Nest Secure, Hello, Dropcam, Nest Thermostat, Nest Protect Canary, Canary View
Arming the system Away starts a 60-second countdown, delaying the armed state to give you time to exit the home without tripping any of the sensors. Opening a protected door while the system is armed also triggers a 60-second countdown, this one is to give you time to reach the keypad to disarm the system. If a sensor installed on a window is tripped while the system is armed, the alarm will go off instantly. That’s sensible: No one should be entering or leaving the home through a window while the system is armed.
The rest of the kit remains relatively standard. The Ring Alarm entry sensors are about a quarter-of-an-inch bigger than SimpliSafe's sensors and don't perform double duty like Nest's large sensors, which also sense motion. They're easy to install with the included mounting hardware and 3M-branded sticky tape, but they seem unnecessarily large and were hard to place so that the magnets would meet each other on both my front door and the back sliding door.
Ring Alarm doesn’t support smart lighting controls, door locks, thermostats, garage-door openers, or other common smart home products today, and there’s a very short list of supported third-party products. But it lacks nothing needed to support those and similar devices down the road. And in an interview with Ring Solutions president Mike Harris earlier this week, I learned that’s exactly what Ring intends to do.
In terms of larger home integration, Nest is the very definition of a smart device. Its Works with Nest program automatically instructs connected products (such as smart lighting and thermostats) to perform their tasks without you having to tell them what to do. It’s an exceptionally hands-off solution, though you can still tweak it with custom preferences.
When it comes to integrating your home alarms with the rest of your smart home, both Nest and Ring offer the option to purchase extenders. It may take a bit of time to figure out if you need one, since the size, layout, and materials in your home can all make a difference in creating dead zones on your property. Nest’s extender will set you back $70, while Ring’s is just $25.
Just one final question if I can, I was looking around a little more at some of your articles and YouTube videos (they are awesome! short and sweet and to the point!), and it seems like the Blink XT would also meet my criteria (the 9 pointers above), is that right? The thing I liked was that it’s much cheaper and apparently I’m getting the same, no? Is there anything I’d be missing out from my list if I go with the Blink camera (and overall do you recommend it)?
You can also mount the base station on a wall, and can connect to your wifi network, or you can connect directly to your router with a network cable. The Ring Alarm base station offers a 24-hour battery backup, plus it can connect to LTE if you have an outage, so you have a cellular option if needed; however, you do have to pay for it with a monthly subscription.
The learning curve was pretty quick once I started playing around with it. Immediately following activation, Ring puts you in a seven day trial period, which is great because I set off the alarm a handful of times because I wasn't used to having it. The trial period lets you use everything the way it's intended, except that when the alarm goes off it won't alert the monitoring company. You can end the trial mode at any point if you prefer to just get right into the full monitoring services.
For the backyard camera I also installed the solar panel which is packaged separately with its own mounting kit. Once it’s mounted, you plug the connector wire into the back of the Spotlight Cam and secure it with two screws. It fits flush to keep water out of the port. Ring recommends one to two hours of direct sunlight per day to keep your battery charged, and you can angle the solar panel’s mounting arm to ensure it soaks up as much sun as possible. The days I tested the Spotlight Cam Solar were mostly overcast, but I still saw a 3-4 percent charge increase each day, and I’d expect much more on sunny days.
Finally, at times the app is slow to connect to the system. For the most part, this isn't an issue, but I've run into a few situations where my kid opened the door to help me out and the alarm started sounding and it took up to 30 seconds for the app to connect to the alarm system. Luckily, I have had enough time in my entry delay period to get it disarmed before the monitoring company was notified, but I'd like to see the app delay disappear.
I’ve had 2 Arlo Pro cams for a few months now. They both work very well, although the false motion trips by wind or in my case a train that comes by is a bit annoying. But what I have found is that I really want a camera that is on 24/7, that I can go back and scan thru in case there’s an issue. The other thing is the delay. I had a person enter my property and the Arlo caught him just as he was almost out of the camera. A friend of mine told me to check out a FLIR camera. I don’t have a good home security system, so I would like to have something that can expand as far as needed. I can always take my Arlo to my office and use it there if I decide to switch.
Other Devices Image Sensor, Smart Switch, Extra Siren, Temperature, Humidity & Light Sensor, Water Leak Sensor, iota Smart Doorbell, Range Extender, Smart Deadbolt Lock (Nest x Yale) Video Doorbell (Pro, Elite, 2), Spotlight Cam, Floodlight Cam, Stick Up Cam, Chime, Chime Pro, Solar Panel, Solar Sign, Ring Beams, Smoke & CO Listener, First Alert Smoke/CO Alarm, Flood and Freeze Sensor Satellite Siren, Smart Switch, Yard Sign
Tap the three-bar icon in the upper left corner of the Dashboard to access the Alarm settings where you can enable/disable email and push notifications, change your location, enable/disable specific sensors while in Home and Away mode, change the Entry and Exit delay timers (30 to 180 seconds), and allow additional users to control the Alarm and other Ring devices.
You can also disarm the system from the app, but in a break from convention, Ring does not offer a key fob for arming and disarming the system. Geofencing that would automatically arm and disarm when you leave and return isn’t supported either. Harris said those were conscious design decisions. “What it came to was security,” Harris said. People said ‘Hey, I want this to automatically disarm my security system when I get close.’ The question then becomes: How close? And is it really you with your phone? Or did someone pick it up at the park, find your address, drive to your house, and let themselves in?”
I recently purchased the new Ring security system after owning the video doorbell for a while. I bought this system to allow me to ditch my system and service from a large national provider (42$ per month for monitoring vs 10$)! Firstly, I have been interested in this product and company since I saw Jaime Siminoff on Shark Tank back in 2013. Back then the company was called DoorBot. I like the new name much better.
Finally, unlike abode’s base station (iota does not require Ethernet), Ethernet is not required to use Nest Secure. Nest likes to make things easy and they send everything you need, including batteries, to get your device up and running. Nest Guard ships with a 6-foot cable with a power adapter and CR123 batteries for the sensors. My system already had the batteries installed which made setup even easier.
Where abode Wins: abode offers free cloud storage, and they offer the widest range of equipment including glass break and flood sensors which are viewed as essential home security devices. Also, abode uses an open platform allowing more third-party integrations via Z-Wave and Zigbee backed by their CUE automation engine. It’s true that Ring offers Z-Wave and Zigbee too, but details on compatible products are still scarce. Fourth, abode has more home security experience than Nest and Ring.
Canary also allows you to share access with other users. Through the Canary app, all users will have full control over your cameras. If you want to limit other users’ access, you can choose who has access to what camera through the use of multiple locations. For example, you can give person A access to location 1 but not location 2. Better still, locations can be at the same address so your location 1 and location 2 can both include cameras in your home.
Installing Canary Flex was easy. Part of that comes from the fact that I’m a Canary indoor camera user. To add Canary Flex, I plugged it in (Even though it can be battery-powered, Canary recommends starting with a full charge.), turned my phone’s Bluetooth feature on, visited the app, and selected “Add Canary device”. From there, you confirm the physical location of your camera, tap the button on the back of the device, and it begins to pair.
Ring’s smart home security system does not include carbon monoxide monitoring. If you want to add this feature to your home, you can purchase either Ring’s Alarm Smoke and CO listener or First Alert’s Z-Wave Smoke/CO alarm. These are installed next to your current smoke alarms and will hear when either go off which triggers your security system and lets you know there is an emergency at home.
Ring suggests that the motion detector should be placed in a location with a good view of a high-traffic area likely to be passed by any intruders, with the detector placed about seven feet off the floor. Motion detection sensitivity can be adjusted in the app if you find you're getting too many false alerts such as from a pet. The detector can be mounted using either adhesive or included screws that attach a bracket to the wall for easy removal of the detector itself.
I'll be the first to admit, the thought of installing the alarm system on my own was a bit scary, and I didn't know that I would be able to get it done. I'm not exactly the handiest person, and my wife doesn't like things to be messy in our brand new house. Ring does an incredible job at making the unboxing experience extremely easy by labeling everything so you exactly what goes with what. In just under 90 minutes I was able to get everything out of the box and set up, including mounting the hardware.
The camera uses the same Android and iOS mobile app as the Ring Floodlight Cam and all of the Ring doorbells, and you can access it from a PC using the web console. The Spotlight Cam appears in the list of installed Ring devices in the app: tap it to access its dashboard screen where you can turn motion alerts on and off and check the battery level. Tapping the Live View button launches a live video stream in landscape mode with buttons for turning the spotlight on and off, sounding the siren, recording and sharing a clip with neighbors, push-to-talk (two-way audio), muting the sound, and ending the stream.
In addition to sharing camera access, having multiple users will make geofencing even more intelligent. The cameras will arm when everyone is away and disarm when at least one person is home. You can also see who is home and who is away using the mobile app and set up Presence notifications to alert you of the same. Finally, it brings everyone in on the action. If an event is detected, an alert will be sent to all users. If one user responds to the alert, other users will be able to see how that person responded. You can also leave a comment on the event and chat with other users directly within the app.
Ring's Neighborhood is a cool feature that lets you share recorded events with neighbors who have joined the Neighborhood. You'll receive alerts when a neighbor posts a video and when there's fire and police activity in your neighborhood. The Events tab takes you to a screen where you can view a list of all camera and alarm events including sensor activity, arming and disarming times, and motion detection. Below the Neighbors and Events tabs are windows with live views of each installed Ring video doorbell and camera.
I want to say first this is one of the best reviews I have ever seen. It had me reading and viewing the videos all the way to the bottom. Thanks for doing this. I am a retired policemans wife and wanted a good camera. My only problem is internet, I have,a hotspot for internet. I purchased the ring flood light and Ring customer service told me it wouldn’t work or if it did only for a few days. Well It has been a week now and still working. (not yelling) MY QUESTION IS: Does any of the above work off a hotspot wifi without a router? Since I have no router and Ring does work with hotspot. I did purchases TP Link wifi extender. The device health is Good (RSSI) 46 to 53 range. I am kinda Pretty good with technical issues, but nowhere knowledgeable as lots of people. I do work for a judge he’s an appeal judge and anything goes wrong with the computers phones or anything I take care of all of it although I am his JA which is judicial assistant I put in all the orders in issue writs and stuff like that. Thanks in advance for all your help. Also thanks so much for the review.
We installed two new Floodlight Cams, one over the garage, and one in the backyard. Easy installation into existing Floodlight box. After installation, we had a problem connecting. We just call up support and they walk us through it within minutes. Great compliment to our Ring Video Doorbell Pro. We love it so much, our daughter got one, and we monitor their house too.