The device shipped ready to be mounted on an eave, but I decided that I wanted to mount it on a wall. To do that, you have to swap the mounting plate from an upward facing to a downward facing position. What I learned while doing so is that Ring fails to mention that the device does not ship with the security screw already in place so even if the mounting plate is already in the position you want, make sure to check on the security screw. Instructions on removing the mounting plate are found on page 15 of the included instruction manual.
After using Flex unplugged for a little over two weeks, the battery fell critically low before getting to the point where the camera would no longer turn on. I don’t blame this on the weather as much as I do the wind. Continued tests showed a battery life of 2-4 weeks. Per a reader request, I retested the camera in August. The weather is warmer here in August, it’s less windy, and Canary has since made several adjustments to help extend Flex’s battery life. This time, the battery lasted a full seven weeks.
Nest, Ring, and abode all sell cameras. Nest works with Nest Cams including the indoor and outdoor cameras, Nest IQ both indoor and outdoor, as well as Nest Hello. When Nest Secure detects an alarm event, it will trigger your Nest cameras to take a snapshot. If you have email alerts turned on, the cameras will email you a snapshot of the event. It can also send a push notification to your phone.
It was 20*F outside when I installed the cam. I didn't want to be running up and down a ladder if I had problems connecting to the network. I wired the cam up with a plug (from an old, grounded extension cord) and ran the wifi setup routine at my kitchen table. I verified everything was working (including the app, motion detection, etc.) before I installed it outside.