Ring, an Amazon company, also sells several security sensors. First is the keypad. The keypad runs on battery power, and you can wall mount it or place it on a flat surface. In addition to arming and disarming your system, the Keypad Control Panel allows you to choose between Armed Away and Armed Home. When using the keypad to arm your system, it provides a grace period to reduce false alarms. You can customize the grace period using the mobile app. Finally, you can simultaneously press and hold the check and x buttons for three seconds to trigger the panic alarm.
Regardless of whether you go the adhesive or hardware route, Ring provides everything you need right in the box, with installation kits for each component of the system conveniently boxed and labeled to make it easy to find what you need. All you'll need if you want to use the included screws and anchors for hardware mounting are a screwdriver and a drill.
One final issue has more to do with software performance than hardware issues, but it’s important to point out. From time-to-time, the snapshot will record a little too late. In the example above, it caught the UPS man’s back. For those without a Nest Aware subscription, this is all you get. Those with a subscription can rewind footage to see the moments before the clip.

Tapping the Spotlight Cam icon in the Ring app opens a dedicated screen with all the camera’s controls laid out. The Ring app is one of the best in this regard, as it doesn’t require you to go hunting through nested settings menus to find what you need. At the top are on/off toggles for the camera’s lights and motion alerts. Using a selection of buttons below these, you can open the camera’s streaming feed, event history light settings, and more.
Hats off to Ring for the smooth-as-silk installation process. This system was easier to set up than anything in my experience. Although there are no installation videos integrated into the app, as Ring provides with its other products, I didn’t miss them at all. The app takes you through each step with pictures and a brief explanation, just enough information so you don’t feel like you’re learning the system by rote. A printed instruction manual is also provided.
I’m not certain about Nest, but I asked abode about this before. They said, “We have what is called abode Signal Guard. Unlike other smash and grab solutions, the Signal Guard works whether your system is self-monitored or professionally monitored. The abode Signal Guard alarm acts just like a normal alarm where notifications are sent and the siren(s) go off until the alarm is disabled. If you are a professionally monitored customer, the monitoring center is notified of the abode Signal Guard event.”

The Ring Alarm is equipped with the hardware to serve as a smart hub, though it's not quite there yet. While the base station contains both ZigBee and Z-Wave radios, only the latter is user- accessible, and any noncertified third-party devices that are paired won't trigger the alarm. You can pair Z-Wave products through the Ring app, but they'll only use the base station as a bridge.
All three systems require that you purchase the hardware upfront, and they all offer some services for free including free app access as well as third-party integrations (though many of Nest’s and Ring’s integrations have yet to launch). However, they all offer paid plans too. Nest and abode have three options: self-monitoring, self-monitoring with cellular backup, and police dispatch with cellular backup. Ring has two options: self-monitoring and police dispatch with cellular backup.

Canary also allows you to share access with other users. Through the Canary app, all users will have full control over your cameras. If you want to limit other users’ access, you can choose who has access to what camera through the use of multiple locations. For example, you can give person A access to location 1 but not location 2. Better still, locations can be at the same address so your location 1 and location 2 can both include cameras in your home.
The Alarm system does not have as many bells and whistles as Nest’s system, nor does it have some of the conveniences Nest provides. But at $199 for the starter bundle, which includes the necessary hub, a keypad, a motion detector, a contact sensor for doors or windows, and a range extender, plus $10 per month for professional monitoring, Ring’s system is significantly cheaper than Nest Secure (which was just recently reduced to $399 for its starter kit) and is one of the least expensive home security systems you can purchase.
Next, they have plans to sell a Ring Smoke & CO Listener that listens for the sound of your smoke detector then sounds your siren and sends an alert if anything is detected. Keep in mind that this is not a smoke detector, but rather a device that will supplement your current smoke alarm system. As already mentioned, you can also buy the First Alert Z-Wave Smoke/CO Alarm, which will connect to your Ring Alarm system.
Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.
Using a Family Account, you can share access with nine other people. However, Nest’s sharing feature is problematically one-size-fits-all. All members will have full control over your account, including all cameras and connected devices such as thermostats and smoke alarms. As an example, I gave my family access to a camera placed at my grandmother’s. They can now view the camera at my grandmother’s and also the camera at my house. There is no way to limit their access. Also, they can’t set their own notification preferences, so they either have to put up with all the notifications from my house, or I have to turn off my notifications.

Ring, an Amazon company, also sells several security sensors. First is the keypad. The keypad runs on battery power, and you can wall mount it or place it on a flat surface. In addition to arming and disarming your system, the Keypad Control Panel allows you to choose between Armed Away and Armed Home. When using the keypad to arm your system, it provides a grace period to reduce false alarms. You can customize the grace period using the mobile app. Finally, you can simultaneously press and hold the check and x buttons for three seconds to trigger the panic alarm.


Ring makes sure that no matter your experience level, you're empowered with information. The minute you open the box, there are neatly packaged containers with nearly every component needed to install the kit. Before you do any of that, however, you'll have to add each device through the Ring mobile app, which is extremely straightforward — all you have to do to start setting up accessories is tap the button that says "Set up a new device."
I’ve heard others say Arlo is the perfect outdoor camera. I disagree. The original Wire-Free camera had more latency than Arlo Pro. Also, Pro includes a wider field of view, a rechargeable battery, a siren (built into the hub), and it adds sound with two-way audio, all features the original Arlo lacked. Arlo Pro 2 bumps up the resolution to 1080p and adds three features if the camera is plugged-in: CVR, Motion Zones, and Look Back.
From what I understand, it’s not so much a matter of just buying a device, but also programming it to the exact frequency that matches your alarm system. (Which makes an interesting case for not using a security sign, but that’s another debate.) That said, a really good signal jammer can cost upwards of $1,000, and as CNET pointed out, they would still have to smash a window or break down your door. The guy who wants money for his addiction isn’t going to spend the money and effort needed to pull off a jamming heist. Of course, if you are a public figure or might be the target of a more complex attack, I would suggest looking into a wired alarm system.
Most companies will include a statement that says that recorded footage is only viewable by the customer. Regarding privacy, Nest, Ring, Canary, and Arlo all do a great job. Recently, I looked into where the cameras were sending data, including Argus. You can read about that here. If privacy is your top priority, Argus is a good option because it doesn’t have to send anything to the cloud. Though I’m not a huge fan of Netatmo cameras, they would also be a good option for you. Finally, CleverLoop. You can read more about how those two cameras work with/without the cloud here.
If you already have a Ring doorbell or security camera, the integration is quite seamless, and the value becomes even better on the annual costs. Ring charges $30 a year per camera on the regular subscription, so if you've been holding out on adding to your system, this may push you over the edge. The company has plans to offer additional sensors in the future, like smoke and CO sensors, water sensors, and more, which will only help make it even more robust.
Finally, unlike abode’s base station (iota does not require Ethernet), Ethernet is not required to use Nest Secure. Nest likes to make things easy and they send everything you need, including batteries, to get your device up and running. Nest Guard ships with a 6-foot cable with a power adapter and CR123 batteries for the sensors. My system already had the batteries installed which made setup even easier.
How far away would the two doors be from an available Ethernet outlet? My thought is that you could use a system where the cameras actually talk to the base station, not the internet. Arlo, for example, uses cameras that talk to the base station directly. When the base station is plugged into Ethernet, it creates its own WiFi network which the cameras connect to directly versus connecting to your home network. The hard part would be that the base station needs to be in a central location between the two doors and, as I stated, connected using Ethernet. In a perfect world, you can place the Arlo cameras up to 300 feet away from the base station, but lots of things can obstruct their ability to talk to the base like walls and doors.
And that is its job, to keep the camera charged. However, I noticed during testing that it does charge the battery too. When I installed the camera, the battery level was at 40%. Soon after connecting the solar panel, that percentage jumped to 50%. The next day it rained, and the percentage climbed from 50 to 52%. Day three was overcast, and yet the battery level crept up to 56%. Day 4 was a beautiful sunny day, and the battery level jumped to 78%. By the end of day 4, I was at 100%.
The Ring Spotlight Cam Battery is ideal for users who want to monitor what's going on outside but don't want to be bothered with electrical wiring. Installation is a breeze, and with two battery packs installed you can get up to two years of power between charges. The Spotlight's motion sensor shined bright in testing, and the camera's 1080p day and night video was sharp. As with other Ring devices, the Spotlight can be integrated into a Wink or SmartThings home automation environment, and it works with IFTTT and Alexa voice commands as well as several other third-party devices. However, you have to subscribe to a Ring Protect plan to view and share recorded video.
As far as Ring Alarm, I don’t have an answer for you, but I understand and appreciate the knowledge you’ve shared. I would also agree that if they haven’t advertised jamming detection, that’s probably because it doesn’t exist. A Twitter friend of mine, who works for Underwriters Laboratories (UL), also mentioned that the system is not UL certified. Again, probably not as important to you as this jamming issue, but something interesting to note.
Setting the Ring to away will trigger a customizable countdown timer (from 30 seconds to 3 minutes), to give you time to cancel the alarm or exit the home. It will then push a notification to your phone when the system is armed, as well as announce audibly through the base station and keypad in the home that it has been armed. The system will also push notifications when the alarm is triggered via motion or through an entryway, as well as when it’s disarmed. In my experience, the push notifications were near instant to my device, but I would not want to rely on them in lieu of the professional monitoring, as they would not reach me if my phone had no service or was otherwise inaccessible. The only thing Ring is missing compared to a system from ADT is the ability to detect when a glass windowpane is broken, though it’s worth noting that Nest’s Secure system doesn’t offer this feature either.
Nest Cam Outdoor’s temperature range is limited to -4° to 104°F. In the same breath, the Nest team warns of placing the camera in direct sunlight to avoid overheating the device. So if the device can only handle 104° and it might heat up in the sun, is it really ready to live outside? Perhaps it’s not that the device isn’t ready to live outside, but that it’s more suited for temperate zones.
My goal with a security camera is to help protect my neighborhood, not my house. (My house is protected as much as any house can be, trust me.) That said, to do my part, I need a camera that can record 24/7 (Stick Up Battery can’t, although the option will soon be available to wired Stick Up Cam users). I also need a camera that can capture a wide angle (Stick Up Battery can’t), and I need a camera that will allow me to quickly sift through footage when my neighbor’s request help (Stick Up can’t).
UPDATE 16FEB2018: After two weeks, I must downgrade my review... it's become obvious that the Ring Floodlight Cam only detects motion during the day. At night, I can walk through the center of my defined motion zone, but the cam won't record until I'm within 10 feet of it. The defined zone is my driveway which is about 40 feet long and we have 3 cars. As long as the ne'er-do-wells only break into the car parked closest to the Ring cam, they will be recorded. A quick Google search for "ring cam won't detect motion at night" will yield many stories of the Ring product line failing to work in darkness. Apparently, the problem has been documented since September 2017 and Ring has failed to fix it. I must say that I'm beyond disappointed. At least I discovered this in enough time to send the cam back to Amazon for a refund.
×